1OM-1075-002.pdf - 第13页

2 . 2 Precautionary Items before Operation 2.2 Precautionary Items before Operation • Remove the selection key of the [OPERA TION] switch before operating the machine automatically . The selection key must be used to set…

0308-003 11 AHB01EOPP

• Only a well-trained personnel should operate the machine.

• In case of earthquake, windstorm, fire, or lightning, stop the machine im-

mediately, turn off power switches and cut the power supply to the ma-

chine.

2.1 Basic Precautions

• Do not use the floppy disk drive in the control box. Otherwise, the ma-

chine may break down because the program in the hard disk of the ma-

chine may be changed due to computer viruses or worms.

Fig. 1X9-1 Floppy Disk Drive in Control Box

WARNING

CAUTION

2.2 Precautionary Items before Operation

• Remove the selection key of the [OPERATION] switch before

operating the machine automatically.

The selection key must be used to set the [OPERATION] switch to the

"SETUP" mode and kept by the person in charge. In other cases, the key

should not be kept inserted.

• Do not set the [OPERATION] switch to the "SETUP" side un-

less any setup operations are performed.

When the [OPERATION] switch is set to the "SETUP" side, setup opera-

tions become possible with the front safety door being open. It is very

dangerous to operate the machine without safety check. Be sure to pay

a special caution while operating the machine.

Fig. 1X10

• Make certain that no one (or only part of body and clothes) or foreign

objects remain within the moving parts of the machine. Check safety

and power up the machine to start operating the machine.

Do not start the machine unless those working in the immedi-

ate area of the machine are aware of hazards from moving parts.

0308-003 1 2 AHB01EOPP

RUN SETUP

Front Operation Panel

OPERATION

[OPERATION] Switch

Selection Key

WARNING

2.2 Precautionary Items before Operation

• Only qualified personnel should come within the operating area of the

machine.

• Inspect the devices before starting the automatic operation.

• In principle, the buttons on the operation panel and the keys

on the touch screen must be operated by only one person.

If there are more than one, ensure good communication by giving loud

verbal instructions.

• Do not use any unspecified tape and vibratory stick feeders.

0308-004 1 3

AHB01EOPP

• After the machine has been stopped for a long period of time, follow the

steps below to smoothly start up the machine.

• Secure stable environmental condition (room temperature, etc.) for the

machine.

• Perform a running-in operation for approx. 30 minutes.

Refer to "8. Running-In Operation" in "Section 5" of "Vol. 2: Operation

(Supervisor)" for the detailed information on the running-in operation.

CAUTION

Fig. 1X11