1OM-1075-002.pdf - 第144页

0206-001 4 - 1 0 AHB01ETRP

Table 1D8

(a) When the "Warm Start" operation is feasible, the [WARM] button

appears in the "OPN. MODE" window (submenu).

(b) When the [WARM] button is not displayed, it means that the "Warm

Start" operation is not feasible or there was a mistake in the re-

medial procedure after an error had occurred. In this case, per-

form the semi-automatic operation (step designation) to reset the

machine to its normal condition.

(8) Check how the last component was placed when the operation was inter-

rupted.

The last placement step is indicated in the "

Last Placed Step Data"

group box in the "OPN. MODE" window (submenu).

Check visually whether or not the relevant component is placed on

the P.C.B.

(9) Press the [Last Posn.] button (entitled “Move Beam X/Y") in the “OPN.

MODE" window (submenu).

(10) Press the [RECOG.] button on the main menu bar and make the recog-

nition window (1/4 of the whole view at the upper right corner) appear.

(11) Press the [ON] button (entitled "MOVE"). In two seconds, press the [EN-

ABLE] button on the operation panel.

The last placement position is displayed as a recognition image.

Fig. 1D11 "OPN. MODE" Window (Last Step Confirmation)

(12) Check whether or not the component is placed. If not, select the [Place-

ment] button. If the component is already placed, select the [Not Place-

ment] button.

(13) Press the [ENABLE] button on the operation panel in 2 seconds after

the [Origin Posn.] button (entitled “Move Beam X/Y") and the [ON] button

(entitled “MOVE").

The XY beam returns to its origin.

(14) Press the [START] button on the operation panel. The "Warm Start"

operation is implemented.

(15) As for the P.C.B. produced through "Warm Start" operations, be sure to

confirm that all components are correctly placed.

3.2 Continuous Operation Disabled during Component Placement

0308-003 4-9 AHB01ETRP

Note

0206-001 4-10 AHB01ETRP

1st Edition Issued Apr., 2003 Copying Prohibited

2nd Edition Issued Aug., 2003

Compiled and Distributed by

0308-002

AHB01EOPP