1OM-1075-002.pdf - 第7页

0308-005 6 AHB01EOPP Contents Page 1.2.3 Preparation for Components and P .C.B.’ s ....................... 3-10 1.3 Start of Automatic Operation .................................................. 3-12 1.4 T emporary Stop…

0308-005 5 AHB01EOPP

Contents

Page

2.3.6 Front Operation Panel .......................................................1-12

2.3.7 Rear Operation Panel ........................................................1-20

2.3.8 Service Panel ......................................................................1-24

2.3.9 Ethernet LAN .......................................................................1-24-1

2.4 Main Units ................................................................................1-25

2.4.1 Location of Main Units .......................................................1-25

2.4.2 Feeder Bases ......................................................................1-26

2.4.3 L and R Conveyor Sections ...............................................1-27

2.4.4 P.C.B. Positioning Section .................................................1-28

2.4.5 X/Y Beam Section ...............................................................1-29

2.4.6 Placement Head Section....................................................1-30

2.4.7 Component Recognition Section......................................1-32

2.4.8 P.E.C. Recognition Section ................................................1-33

2.4.9 Nozzle Stocker Section .....................................................1-34

3. Surface Mounting Mechanism ...................................................1-36

3.1 P.C.B. Transfer and Positioning .............................................1-36

3.2 Component Picks and Placement ..........................................1-38

3.3 P.C.B. Transfer (to the output machine)................................1-39

Section 2 Basic Knowledge of Operation

..................2- A

1. Basic Operations .........................................................................2- 1

1.1 Selection of Front or Rear Operation Panel ........................2- 1

1.2 Touch Screen...........................................................................2- 2

1.2.1 Operation Windows ............................................................2- 2

1.2.2 Notes on Handling Touch Screens ...................................2- 3

2. Starting or Exiting from the Application ....................................2- 4

2.1 Getting Started ........................................................................2- 4

2.2 Structure of Operation Windows ...........................................2- 6

2.3 Exiting from Operation Window .............................................2- 8

Section 3 Scope of Automatic Operation

...................3- A

1. Normal Automatic Operation ......................................................3- 1

1.1 Inspections before Automatic Operation ..............................3- 2

1.1.1 Confirmation of Power Supply and Air Pressure ............3- 2

1.1.2 Confirmation of Safety Doors

and Feeder Base Pullout Prevention Bars ..........3- 4

1.2 Preparation before Operation ...............................................3- 5

1.2.1 Power ON Operation ..........................................................3- 5

1.2.2 "AUTO OPN." Windows and

Zeroing of Each Device ..........................................3- 8

0308-005 6 AHB01EOPP

Contents

Page

1.2.3 Preparation for Components and P.C.B.’s .......................3-10

1.3 Start of Automatic Operation ..................................................3-12

1.4 Temporary Stop and Restart of

Automatic Operation ......................................3-15

1.4.1 Replenishment of Components ........................................3-15

1.4.2 Replenishment of P.C.B.’s .................................................3-17

1.4.3 [STOP] and [ON] (entitled "STOP") Buttons...................3-18

1.4.4 Stop Operation by Selection of

"Auto Stop Mode" ...........................................3-18-1

1.5 Interruption of Automatic Operation .....................................3-19

1.5.1 Interruption with [CANCEL] Button ..................................3-19

1.5.2 Interruption with [EMERGENCY STOP] Switch ..............3-20

1.6 End of Automatic Operation ...................................................3-21

1.6.1 Stop of Automatic Operation .............................................3-21

1.7 Shut-Down Operation .............................................................3-22

1.7.1 Procedure for Shut-Down Operation ...............................3-22

1.7.2 Locking the Power Breaker with the Padlock .................3-24

2. "PASS" Mode ...............................................................................3-25

2.1 Start of "PASS" Operation ......................................................3-25

2.2 Temporary Stop of Pass Operation .......................................3-28

2.2.1 Temporary Stop (Pause) with [STOP] Button ..................3-28

2.3 Interruption of "PASS" Operation .......................................... 3-28

2.3.1 Interruption with [CANCEL] Button ..................................3-28

2.3.2 Interruption with [EMERGENCY STOP] Switch .............3-28

2.4 End of "PASS" Operation .......................................................3-29

2.4.1 Stop of "PASS" Operation .................................................3-29

2.4.2 Shut-Down Operation ........................................................3-29

Section 4 Remedy of Simple Trouble

...........................4- A

1. Power Operation Impossible......................................................4- 1

2. Nothing Displayed on Touch Screen ........................................4- 3

3. Remedial Procedures from "ERROR" Window ........................4- 4

3.1 [EMERGENCY STOP] Switch Pressed .................................4- 4

3.1.1 During Automatic Operation ..............................................4- 4

3.1.2 During Pass Operation ......................................................4- 6-1

3.2 Continuous Operation Disabled during

Component Placement ......................... 4- 7

Checking Items

1. Transfer and/or Resale of Machine

• If the machine is scheduled to be transferred to another place and/or

resold to a third party, please contact our marketing department or sales

agency beforehand.

Any relocation and/or resale of the machine without prior written notice

or advice, we will in no way be liable for any trouble or malfunctions of

the machine regardless of the possibility of any trouble or malfunctions

arising from the displacement.

• Before setting up a resold and/or transferred machine, please ask our

service personnel or sales agency for safety inspections.

Examples of Errors or Malfunctions after Machine Transfer

(1) The machine may malfunction, depending on the local power

source (difference in power frequency or voltage).

(2) When the machine is transferred to another place, it may mal-

function due to environmental condition such as electric wave

interference or noise.

• These instruction manuals should be regarded as part of the machine.

The contents of these manuals comply with the specifications of the

machine. Whenever the machine is scheduled to be resold to a third

party, be sure to sell the machine together with these manuals.

2. Request on Machine Disposal

• This machine (TIM-X series) uses a strong permanent magnet in the moving

mechanism of the X/Y beam section (X and Y axis).

Before disposing of the machine, please contact our marketing department or

sales agency for the proper disposal.

0308-004 7

AHB01EOPP