1OM-1075-002.pdf - 第57页
2.3.6 Front Operation Panel Fig. 1A1 1 Fig. 1A12 Arranged on the operation panels are switches and buttons required to operate the machine. The machine is provided with the front and rear operation panels and can be oper…
2.3.5 [TRAY LOAD] Switch (Option)
Fig. 1A10-2
The [TRAY LOAD] switch (green lamp) is used to indicate how the multi-
layer tray feeder (option) is replenished with component supply.
Lamp ON/OFF Condition
Table 1A2-3
Mode Condition of Multi-Layer Tray Feeder
ON Loaded with Components
(Replenishment Completed)
ON and OFF Not Loaded with Components
(Component Shortage)
OFF Not used in the current pattern program
When the [TRAY LOAD] switch flickers, replenish the component sup-
ply.
(a) Refer to the instruction manual "Multi-Layer Tray Feeder
(TIM-X Series)" for the replenishment of tray components.
(b) The [TRAY LOAD] switch flickers (indicating component
shortage) according to the parameters specified in the
"Matrix X" and "Matrix Y" text boxes of the label "Tray data"
or the "1" text box of the label "Error process" in the com-
ponent library data.
2.3 Equipment for Operations
0308-002 1-1 1-2 AHB01EOPP
[TRAY LOAD] Switch
Note
2.3.6 Front Operation Panel
Fig. 1A11
Fig. 1A12
Arranged on the operation panels are switches and buttons required to
operate the machine.
The machine is provided with the front and rear operation panels and
can be operated from either one of the panels. Panel selection is pos-
sible with the [PNL CHANGE] buttons.
A slide-type keyboard is stored under the front operation panel.
*12 Front Touch Screen
*10 Keyboard
0308-004 1-12 AHB01EOPP
*13 Working Lamp Switch
MULTI FUNCTIONAL MOUNTER
STOP
LOCK
OPERATION
RUN SETUP
START
ENABLE
PNL CHANGE
READY
POWER ON
EMERGENCY
*8 [OPERATION] Switch
*7 [READY] Button
*1 [POWER ON] Button
*4 [ENABLE] Button
*2 [START] Button
*9 [EMERGENCY
STOP] Switch
*6 [LOCK] Lamp
*5 [PNL CHANGE] Button
*3 [STOP] Button
*11 Pointing Device
2.3 Equipment for Operations
*1 [POWER ON] Button
• This button is used to turn on the power for operations.
*2 [START] Button
• This button is used to start the automatic operation.
The automatic operation can be started only when the lamp is
flickering.
• While the LED of this button is ON, it indicates that the machine is
running automatically.
When the [STOP] button is pressed during automatic operation,
the LED extinguishes.
The lamp is kept ON while each device is being zeroed.
*3 [STOP] Button
• This button is used to stop the automatic operation.
• When this button is pressed during zeroing operation, the zeroing
operation of each device is interrupted, excluding the P.C.B. trans-
fer.
*4 [ENABLE] Button
• When the [ON] button (entitled "MOVE") is pressed in the active
touch screen, the LED of the [ENABLE] button illuminates for two
seconds.
When the [ENABLE] button is pressed with its LED "ON", the ma-
chine performs various operations selected in the operation win-
dows.
0206-003 1-13
AHB01EOPP
2.3 Equipment for Operations
Note