1OM-1075-002.pdf - 第54页
2.3.3 Component Shortage Lamps Fig. 1A10 When either one of the component shortage lamps illuminate, it indi- cates that there is a feeder in short of components on the pertinent feeder base. The front component shortage…
2.3.2 Light Tower
Fig. 1A9
The light tower indicates the condition of the machine with the lamps
and buzzer sounds.
Lamp Colors
The machine is factory-adjusted upon shipment.
Table 1A2
Lamp Colors Machine Condition
Red Error (Machine Stop)
Yellow Component Shortage (Warning)
Green Automatic Operation
Note: When the machine is in the standby
mode, this lamp flashes.
Buzzer
Table 1A2-1
Buzzer Machine Condition
Continuous Sound Emergency Stop
Intermittent Sound Error Occurrence
The condition of the machine corresponding to the parameters
specified for each lamp color can be changed at the "MACH
SETUP" window.
Refer to "2.3 "Configuration Setup" Tab" of "Section 5" in "Vol. 3:
Programming and Machine Data" for details.
0206-002 1-10 AHB01EOPP
2.3 Equipment for Operations
Note
2.3.3 Component Shortage Lamps
Fig. 1A10
When either one of the component shortage lamps illuminate, it indi-
cates that there is a feeder in short of components on the pertinent
feeder base.
The front component shortage lamp indicates the condition of the feed-
ers on the front feeder bases (#3 and #4).
The rear component shortage lamp indicates the condition of the feed-
ers on the rear feeder bases (Feeder Base #1 and Tray #2).
When the machine is equipped with Feeder Base #2 (op-
tion),
the rear component shortage lamp indicates the condition of
the feeders on the rear feeder bases (#1 and #2).
Lamp ON/OFF Condition
Table 1A3
Mode Condition of Feeder Base
ON No tape feeder is in component shortage.
ON and OFF A tape feeder is in component shortage.
OFF There is no tape feeder which can be used
in the current pattern program.
When the "Component Shortage" lamp flickers, replenish the compo-
nent supply.
Refer to "1.4.1 Replenishment of Components" in "Section 3"
for the detailed information on the replenishment of components.
0206-003 1-11 AHB01EOPP
2.3 Equipment for Operations
Note
Note
2.3.4 Status Indicator
Fig. 1A10-1
The status indicator (green lamp) is used to indicate how the tape feed-
ers are replenished with component supply.
Lamp ON/OFF Condition
Table 1A2-2
Mode Condition of Feeder Base
ON Loaded with Components
(Replenishment Completed)
ON and OFF Not Loaded with Components
(Component Shortage)
OFF Not used in the current pattern program
When the status indicator flickers, replenish the component supply.
(a) Refer to "1.4.1 Replenishment of Components" in "Sec-
tion 3" for the detailed information on the replenishment of
components.
(b) The status indicator flickers (indicating component short-
age) according to the parameter specified in the "1" text
box of the label "Error process" in the component library
data.
0206-001 1-1 1-1
AHB01EOPP
Status Indicator
2.3 Equipment for Operations
Note