1OM-1075-002.pdf - 第80页
2.4.9 Nozzle Stocker Section Fig. 1A36 The nozzle stocker section is provided with a mechanism that stores the vacuum nozzles. The placement head moves over to the nozzle stocker and the selected vacuum nozzles are attac…
2.4.8 P.E.C. Recognition Section
Fig. 1A34
The P.E.C. recognition camera is used to detect the fiducial marks on a
P.C.B. and the amount of the positional deviation from the fiducial mark
coordinate date is calculated to automatically correct the position of a
placed component.
Each placement head is provided with one P.E.C. recognition camera.
0206-002 1-33
AHB01EOPP
P.E.C. Recognition Camera
P.E.C. Recognition Camera 1
P.E.C. Recognition Camera 2
Rear Side of Machine
Front Side of Machine
(Top View)
(Rough View)
2.4 Main Units
2.4.9 Nozzle Stocker Section
Fig. 1A36
The nozzle stocker section is provided with a mechanism that stores
the vacuum nozzles.
The placement head moves over to the nozzle stocker and the selected
vacuum nozzles are attached or detached according to the pattern pro-
gram data.
Storage Capacity of Vacuum Nozzles
Nozzle Stocker B1: Max. 10 pcs.
Nozzle Stocker B2: Max. 10 pcs.
0206-002 1-34
AHB01EOPP
Rear Side of Machine
Front Side of Machine
(Top View)
(Rough View)
Nozzle Stocker B1
Nozzle Stocker B2
Nozzle Stocker B2
Nozzle Stocker B1
Note
2.4 Main Units
Do not put any foreign substance on the nozzle
stocker section. Otherwise, the machine will break
down.
• Keep the diffusion plates of the vacuum nozzles
clear of oil, nicks, etc. Otherwise, an error may oc-
cur during component recognition.
• Do not bring a magnet close to any vacuum nozzle.
Otherwise, an error may occur during component
picks and placement.
0308-002 1-35
AHB01EOPP
2.4 Main Units
CAUTION
CAUTION