1OM-1075-002.pdf - 第97页

AHB01EOPP 0107-001 3 - B

AHB01EOPP

Section 3

Scope of Automatic Operation

0308-002 3-A

This section outlines the items to be prepared and confirmed

before automatic operation and how to start or end the opera-

tion.

AHB01EOPP

0107-001 3 - B

AHB01EOPP

1. Normal Automatic Operation

Flow of Automatic Operation

Program Change Operation

Refer to "Vol. 2: Operation (Supervisor)" for details.

Inspections Work before Operation

Refer to the following for details.

1.1.1 Confirmation of Power Supply and Air Pressure

1.1.2 Confirmation of Safety Doors and Feeder Base

Pullout Prevention Bars

Preparation before Operation

Refer to the following for details.

1.2.1 Power ON Operation

1.2.2 "AUTO OPN." Windows and

Zeroing of Each Device

1.2.3 Preparation for Components and P.C.B.’s

Start of Automatic Operation

Refer to the following for details.

1.3 Start of Automatic Operation

Temporary Stop and Restart of Automatic Operation

Refer to the following for details.

1.4.1 Replenishment of Components

1.4.2 Replenishment of P.C.B.’s

1.4.3 [STOP] and [ON] (entitled "STOP") Buttons

1.4.4 Stop Operation by Selection of "Auto Stop

Mode"

Interruption of Automatic Operation

Refer to the following for details.

1.5.1 Interruption with [CANCEL] Button

1.5.2 Interruption with [EMERGENCY STOP] Button

End of Automatic Operation

Refer to the following for details.

1.6.1 Stop of Automatic Operation

1.7.1 Procedure for Shut-Down Operation

1.7.2 Locking the Power Breaker with the Padlock

1. Normal Automatic Operation

Fig. 1C1

Fig. 1C2

0206-003 3 - 1