1OM-1075-002.pdf - 第130页

AHB01EOPP 0206-002 3 - 2 9 • • • • • Stop Operation (1) Press an [EMERGENCY STOP] button. The machine stops running, an error alarm is issued, and the LED of the [POWER ON] button illuminates in red. Refer to "Secti…

AHB01EOPP

2.2 Temporary Stop of Pass Operation

2.2.1 Temporary Stop (Pause) with [STOP] Button

When the [STOP] button on the front operation panel is pressed, each

device returns to its stationary position and the "PASS" operation stops

temporarily.

2.3 Interruption of "PASS" Operation

2.3.1 Interruption with [CANCEL] Button

When the machine is set in the "PAUSE" mode, an [CANSEL] button

appears in the "Run Mode" tab sheet. (Operation Sequence: "[OPN.

MODE] Button on Submenu Bar" Æ "Run Mode" Tab Sheet).

When the [CANSEL] button is pressed, the machine is set in the "STOP"

mode.

2.3.2 Interruption with [EMERGENCY STOP] Switch

Use an [EMERGENCY STOP] switch to immediately stop the machine

in an emergency.

Fig. 1C33

0308-004 3-28

2.2 Temporary Stop of Pass Operation

[EMERGENCY STOP] Switch

[EMERGENCY STOP]

Switches

Front Side of Machine

Rear Side of Machine

AHB01EOPP0206-002 3-29

••

• Stop Operation

(1) Press an [EMERGENCY STOP] button.

The machine stops running, an error alarm is issued, and the LED

of the [POWER ON] button illuminates in red.

Refer to "Section 4 Remedy of Simple Trouble" for the proce-

dures to reset the machine to the normal condition from an emer-

gency stop.

2.4 End of "PASS" Operation

Refer to "1.6 End of Automatic Operation" in "Section 2" for details.

2.4.1 Stop of "PASS" Operation

(1) Press the [STOP] button on the operation panel.

The LED of the [START] button and the green lamp of the light tower

extinguish and the automatic operation stops.

Remove the P.C.B. in the middle of passing inside the machine

if any.

(2) Press the [ALL] button (entitled "ZERO") in the "AUTO OPN." win-

dow. In 2 seconds, press the [ENABLE] button on the operation panel.

2.4.2 Shut-Down Operation

Follow the procedure in "1.7 Shut-Down Operation" and shut down the

power supply.

2.3 Interruption of Automatic Operation

Note

AHB01EOPP0308-001 3-30