1OM-1075-002.pdf - 第58页

*1 [POWER ON] Button • This button is used to turn on the power for operations. *2 [ST ART] Button • This button is used to start the automatic operation. The automatic operation can be started only when the lamp is flic…

100%1 / 145
2.3.6 Front Operation Panel
Fig. 1A11
Fig. 1A12
Arranged on the operation panels are switches and buttons required to
operate the machine.
The machine is provided with the front and rear operation panels and
can be operated from either one of the panels. Panel selection is pos-
sible with the [PNL CHANGE] buttons.
A slide-type keyboard is stored under the front operation panel.
*12 Front Touch Screen
*10 Keyboard
0308-004 1-12 AHB01EOPP
*13 Working Lamp Switch
MULTI FUNCTIONAL MOUNTER
STOP
LOCK
OPERATION
RUN SETUP
START
ENABLE
PNL CHANGE
READY
POWER ON
EMERGENCY
*8 [OPERATION] Switch
*7 [READY] Button
*1 [POWER ON] Button
*4 [ENABLE] Button
*2 [START] Button
*9 [EMERGENCY
STOP] Switch
*6 [LOCK] Lamp
*5 [PNL CHANGE] Button
*3 [STOP] Button
*11 Pointing Device
2.3 Equipment for Operations
*1 [POWER ON] Button
• This button is used to turn on the power for operations.
*2 [START] Button
• This button is used to start the automatic operation.
The automatic operation can be started only when the lamp is
flickering.
• While the LED of this button is ON, it indicates that the machine is
running automatically.
When the [STOP] button is pressed during automatic operation,
the LED extinguishes.
The lamp is kept ON while each device is being zeroed.
*3 [STOP] Button
• This button is used to stop the automatic operation.
• When this button is pressed during zeroing operation, the zeroing
operation of each device is interrupted, excluding the P.C.B. trans-
fer.
*4 [ENABLE] Button
• When the [ON] button (entitled "MOVE") is pressed in the active
touch screen, the LED of the [ENABLE] button illuminates for two
seconds.
When the [ENABLE] button is pressed with its LED "ON", the ma-
chine performs various operations selected in the operation win-
dows.
0206-003 1-13
AHB01EOPP
2.3 Equipment for Operations
Note
*5 [PNL CHANGE] Button
• This button is used to select either the front or the rear operation
panel.
(a) The other operation panel can be selected by press-
ing the [PNL CHANGE] button on the unavailable (in-
valid) side only when the currently selected panel is
not set in the "Operation Locked" mode.
(b) While the LED of this button is ON, the followings be-
come available.
Front Touch Screen
[START] Button
[STOP] Button
[ENABLE] Button
[READY] Button
[OPERATION] Switch
[EMERGENCY STOP] Switch
Pointing Device
Keyboard
(c) The [STOP] button and [EMERGENCY STOP] switch
are always available regardless of the [PNL CHANGE]
button.
(d) When the panel operation is not locked and the [STOP]
button on the unselected operation panel is pressed,
the operation panel on the pressed button side be-
comes activated automatically.
• When this button is pressed with the LED "ON", the "LOCK" lamp
illuminates, indicating that only the front panel is available (Opera-
tion Locked).
To cancel the "LOCK" mode, press this button again.
*6 [LOCK] Lamp
• While the lamp is "ON", it indicates that only the front operation
panel is available and no panel change operation is possible.
• The lamp flickers when any operation is made on the rear
operation panel with the lamp being kept ON.
To cancel the flickering of the lamp, press the [PNL CHANGE]
button and follow the steps to set the operation-lock mode again.
*7 [READY] Button
• This button is used to turn on or off the electromagnetic lock of the
front safety door.
ON : The electromagnetic lock of the front safety door is
turned ON.
OFF : The electromagnetic lock of the front safety door is
turned OFF.
0308-004 1-14
AHB01EOPP
2.3 Equipment for Operations
Note