SYS-CP842-1.1E.pdf - 第101页
3.Machine System SYS-CP842-1.1E 92 CP-842E / CP-842ME System Reference Editing Operation The following e diting operations are possible from this screen. Sequence Type F-mark sequence BS-mark sequence Placement sequence …
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 91
Screen Button Explanations
Display Item Explanations
A. [Sequence No.]: Switches to the sequence search screen.
B. [Coordinate X]: Changes the coordinates (GSQX) for the X-axis
specified in the production program’s sequence data
(SEQUENCE).
C. [Coordinate Y]: Changes the coordinates (GSQY) for the Y-axis
specified in the production program’s sequence data
(SEQUENCE).
D.[Rotation Angle]: Changes the placement angle (GSQQ) which is
specified in the production program’s sequence data
(SEQUENCE).
E. [Direction]: Changes the part supply direction (PMADC) which is
specified in the production program’s part data
(PRTIDDT).
Setting examples:
0: Supplied at 0 degrees.
1: Supplied at 90 degrees.
2: Supplied at 180 degrees.
3: Supplied at 270 degrees.
F. [Set]: Changes the ID (FDRKEY) which is used to link to
information for the part specified in the production
program’s sequence data (SEQUENCE).
G: [Close]: Returns to the production program editing screen.
1. [Sequence Type]: F: Fiducial mark sequence
B: Block skip mark sequence
D: Placement sequence
2. [Comment]: Displays the sequence comment.
3.Machine System SYS-CP842-1.1E
92 CP-842E / CP-842ME System Reference
Editing Operation
The following editing operations are possible from this screen.
Sequence Type
F-mark sequence
BS-mark sequence
Placement sequence
Problem
The panel's F-mark pattern and
the wire frame are not centered
on the monitor.
Panel's BS-mark pattern is
deviated from the wire frame.
Panel's part pattern is deviated
from the wire frame.
Editing Operation
If the F-mark reading position is
incorrect, edit the X and Y
coordinate values.
If the BS-mark reading position
is incorrect, edit the X and Y
coordinate values.
If the placement position is
incorrect, edit the X and Y
coordinate values.
Deviation in 90-degree units
between panel's part pattern
and wire frame.
If the rotation deviation can be
confirmed, edit the rotation angle
or the direction.
Panel's part pattern differs from
the wire frame's part pattern.
If the correct part has not been
set as the pickup destination, use
the pickup destination setting
button to edit the stage number
and the slot number (the group
number and sub-slot number are
set to "0").
T001E
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 93
F-Mark Data Editing Screen
Fiducial mark data editing can be performed from this screen.
Press the START button.
FUJI
Error
Operator
JOG:X Y CAM
Servo CountGEMCCD Monitor
F-Mark Data Editor
FUJI_CP7_2001
Front
Close
1
40
50
0.0000
Mark reading tolerance value
Reading
Deviation
Pitch
[mm]
[mm]
a
c
Size C
Scan Area
0.9000
1.2000
0.0000
[mm]
[mm]
[mm]
8.0000
[mm]
Mark Data
Size A
Size B
Sequence number
0.2620
0.1870
Result
X
Y
[mm]
[mm]
Mark Data
Set Switch
0.0000
CP7S2014E
A
B
C
D
E
F
G
H
I
J2
1
1
Color
Shape
2
Shape : Circle
Color : White