SYS-CP842-1.1E.pdf - 第124页

SYS-CP842-1.1E 3.Machine System CP-842E / CP-842ME System Reference 115 3.3.4 Using the Data Manager The data manager is a gr oup of functions whic h assist users to administer the various kinds of data held at the machi…

3.Machine System SYS-CP842-1.1E

114 CP-842E / CP-842ME System Reference

user name which is installed by default on every machine.

Procedure

1. Press [Maintenance] - [Operator] from the [Main] screen.

The [Operator Settings] screen displays.

2. On the left of the screen is a list of user names. Select the Language button to change

the language for that user.

Note: The Language button only displays for Super User.

Next to the language button is the Settings button. User access can be toggled on and off

using this button.

3. On the right of the screen is the list of settings for which access rights can be set. Select

a setting and use the Settings button for that user to turn access rights on or off.

Press [Close] to return to the [Maintenance] screen.

SYS-CP842-1.1E 3.Machine System

CP-842E / CP-842ME System Reference 115

3.3.4 Using the Data Manager

The data manager is a group of functions which assist users to administer the various kinds

of data held at the machine. Press [Maintenance] - [Data Manager] to display the [Data

Manager] screen.

Using these functions, users can copy data to the hard disk or floppy disk, or restore data

which has been lost or damaged.

3.Machine System SYS-CP842-1.1E

116 CP-842E / CP-842ME System Reference

3.4 Maintenance Mode

Maintenance mode overrides the safety devices on the machine to allow for machine

adjustments. A maintenance key is necessary to use maintenance mode.

3.4.1 Maintenance Mode Operation

The following operations are possible with the safety doors open when using Maintenance

Mode.

• Calibration data measurements (limited use)

• Position (limited use)

• I/O check

• Inching

3.4.2 Entering Maintenance Mode

Procedure

1. Open the front safety doors and turn the Maintenance key to the ON position.

2. In the [Main] screen, select [Maintenance] then [Maintenance Mode]. The [Maintenance

Mode] screen displays.

DANGER

Maintenance mode overrides the safety devices on the machine. Take extreme

care when operating the machine with the safety doors open.

C76M1030

Maintenance switch

Maintenance key

DANGER

Maintenance Mode and the Maintenance key should only be used by

experienced maintenance personnel.