SYS-CP842-1.1E.pdf - 第121页
3.Machine System SYS-CP842-1.1E 112 CP-842E / CP-842ME System Reference 3.3 Administrative Functions 3.3.1 Displaying the Software Versions Users can access the following dialo g box by pressi ng the [FUJI] button in the…
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 111
Editing Operations
The following editing operations can be performed at this screen.
Problem Editing Operation
A vision processing error occurs during test
placement.
Error code: 0x1CAA000C
Body edge could not be detected.
If the lead data is incorrect, edit the detection
position item.
A vision processing error occurs during test
placement.
Error code: 0x1CAA0010
Rough positioning cannot be performed.
If the lead data is incorrect (image brightness
is unsuitable), edit the "luminosity" item.
A vision processing error occurs during test
placement.
Error code: 0x1CAA000D
Part size differs (excessively) from the size
specified in part data.
If the lead data is incorrect, edit the pitch
deviation tolerance item.
T009E
3.Machine System SYS-CP842-1.1E
112 CP-842E / CP-842ME System Reference
3.3 Administrative Functions
3.3.1 Displaying the Software Versions
Users can access the following dialog box by pressing the [FUJI] button in the top left of the
touch panel. Press [Close] to clear the version display.
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 113
3.3.2 Setting Up a New User
The machine system can control what functions are used by operators by means of its built-
tin security settings. An account can be created for each person who uses the machine.
Procedure
1. Press [Maintenance] - [Operator] from the [Main] screen. The [Operator Settings]
screen displays.
2. Press [Copy] to display the [Copy Operator Settings] screen. Select a user name with
settings similar to those that will be specified for the user to be added.
3. Next press [Add], then [Yes] at the confirmation message which displays.
4. Enter the user name, and password at the keyboard. The password must be entered
twice for confirmation.
5. The [Language Manager] screen displays when these entries are complete. Press
[Close] to complete the users settings.
The name added appears in the user list when the machine starts up. The new user has
the same access to commands as the user whose user settings were copied. Refer to the
following section for details of how to customize the settings for a user name.
3.3.3 Changing User Settings
The access rights of each user name are customizable, and allow administrators to identify
which operator is using a machine, and when. These access rights settings can only
specified by those with a Super User status. Super User is a special administration level