SYS-CP842-1.1E.pdf - 第113页
3.Machine System SYS-CP842-1.1E 104 CP-842E / CP-842ME System Reference Vision Type Editing Screen The vision type can be edited from th is screen. For vision type details, refer to th e SMD3 Operation Manual. Screen But…
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 103
Screen Button Explanations
Editing Operations
The following editing operations can be performed at this screen.
A. [Sequence No.]: Switches to the sequence search screen.
B. [Body Length X]: Changes the body’s X-direction length (PTPSZBX)
which is specified in the production program’s part
shape data (PRTFORM).
C. [Body Length Y]: Changes the Body’s Y-direction length (PTPSZBY)
which is specified in the production program’s part
shape data (PRTFORM).
D. [Part Height]: Changes the part height (including leads)
(PTPMNH) which is specified in the production
program’s part shape data (PRTFORM).
E. [Length X] (Check tolerance): Changes the body size’s X-direction tolerance
(PTPTLBX) which is specified in the production
program’s part shape data (TOLEINF).
F. [Length Y] (Check tolerance): Changes the body size’s Y-direction tolerance
(PTPTLBY) which is specified in the production
program’s part shape data (TOLEINF).
G. [Detection Count Tolerance]: Changes the lead detection count tolerance
(PTPTLCL) which is specified in the production
program’s part shape data (TOLEINF).
H. [Vision Type]: Switches to the vision type editing screen.
I. [Element]: Switches to the element data editing screen.
J. [Lead]: Switches to the lead data editing screen.
K. [Close]: Returns to the production program editing screen.
Problem
Panel's part pattern size differs from the wire
frame size. Or, a vision processing error
occurs during test placement.
Editing Operation
If the part size is incorrect, edit the body
length X and Y values.
A part height error occurs during test
placement.
Error code: 0x12040410
A part height which differs from that
specified in part data was detected.
If the part height is incorrect, edit the part
height value.
A vision processing error occurs during test
placement.
Edit the check tolerance X and Y length
values, and the lead detection count
tolerance value.
T006E
3.Machine System SYS-CP842-1.1E
104 CP-842E / CP-842ME System Reference
Vision Type Editing Screen
The vision type can be edited from this screen. For vision type details, refer to the SMD3
Operation Manual.
Screen Button Explanations
Close
Lead
ElementBody
Vision
Type
Camera
Type
Lighting
1
0
Sequence Number
FUJI
FUJI_CP7_2001
Vision Type Editor
Operator
Error
Push the START button.
Front
CCD Monitor GEM Servo Count
JOG:X Y CAM
Basic Data
Set Switch
123
10
CP7S2019E
A
B
C
D
HE F G
A. [Sequence No.]: Switches to the sequence search screen.
B. [Vision Type]: Changes the vision processing unit’s “vision number”
(PTPVICVT) which is specified in the production program’s part
shape data (VISION).
Setting examples:
10: Square chips
20: SOT (small outline transistor)
100: IC lead parts
C. [Camera Type]: Changes the image acquisition camera type (PENVICT) which is
specified in the production program’s part shape data (ENVDT).
Setting examples:
0: Wide camera
1: Narrow camera
D. [Lighting]: Changes the part lighting type (PENVILIT) which is specified in
the production program’s part shape data (VISION).
Setting examples:
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 105
0: Backlight
1: Frontlight
E. [Body]: Switches to the body data editing screen.
F. [Element]: Switches to the element data editing screen.
G. [Lead]: Switches to the lead data editing screen.
H. [Close]: Returns to the production program editing screen.