SYS-CP842-1.1E.pdf - 第13页
1.Safety Guideline SYS-CP842-1.1E 4 CP-842E / CP-842ME System Reference 1.2 Safety Rules for All Machine Types DANGER Do not approach moving parts dur ing automatic or manual operation. • Do not place hands or other body…
SYS-CP842-1.1E 1.Safety Guideline
CP-842E / CP-842ME System Reference 3
1. Safety Guideline
Fuji machines are designed and produced with safety as one of our main considerations.
However, even a perfectly designed machine can be damaged, or someone can still be
injured if the user does not follow the safety rules. It is the responsibility of the user to make
sure all safety rules are followed during operation and maintenance.
Be sure to read these safety rules before operating the machine. Keep this manual close
at hand when operating the machine.
1.1 About Symbols
To avoid injury to persons and damage to the machine, Fuji employs a number of messages
and symbols that are used in manuals and on the machines. Be sure you understand the
meanings of these symbols before reading the manual.
1.1.1 Degree of Hazards
1.1.2 Examples of the Symbols
Symbol Definition
DANGER
Failure to observe this hazard warning will lead to severe
injury or death.
WARNING
Failure to observe this hazard warning may lead to severe
injury or death.
CAUTION
Failure to observe this hazard warning may lead to
personal injury or damage to the machine.
Symbol Explanation
Hazard
A triangle is used to draw your attention to a hazard. The symbol
inside the triangle indicates the nature of the hazard (in this case,
electrical shock).
Prohibition
A circle with a diagonal line is used to draw your attention to an
operation that is prohibited. The symbol inside the circle indicates
the nature of the operation (in this case, disassembly).
A circle with an exclamation mark is used to draw your attention to to
a mandatory action. In other words, you are required to carefully
carry out the given instructions.
1.Safety Guideline SYS-CP842-1.1E
4 CP-842E / CP-842ME System Reference
1.2 Safety Rules for All Machine Types
DANGER
Do not approach moving parts during automatic or manual
operation.
• Do not place hands or other body parts inside the machine
during automatic operation or positioning. Body parts or
clothing may be caught in the machine causing personal
injury.
Do not operate the machine with the safety covers or doors
open.
• Do not leave covers or safety doors open, except during
adjustment.
• When adjustments are completed, return the covers and doors
to their original (closed) position.
• When safety covers or doors are removed, body parts or
clothing may be caught in the machine causing personal
injury. Always be sure to replace the safety covers or doors.
WARNING
Always verify the position of the EMERGENCY STOP
buttons before operating the machine.
• Always be aware of the positions of the EMERGENCY STOP
buttons so that they can be pressed quickly in case of an
emergency.
Check the safety functions before starting operation.
• Before starting the machine check the operation of the
EMERGENCY STOP button, the safety switches on the
acrylic covers, the safety switch on the rear fence gate, the
optical sensors on the rear fence and all other machine safety
features.
• Contact a Fuji serviceman immediately if any of the safety
functions fails.
SYS-CP842-1.1E 1.Safety Guideline
CP-842E / CP-842ME System Reference 5
Do not remove safety switches.
• Do not remove safety switches or disarm the safety functions.
• Disarming the safety switches may result in injury when others
unknowingly press the START button.
• Fuji does not take any responsibility when a machine is
disassembled without Fuji's permission, even if this results in
accidents or trouble.
Check that there is nobody inside the machine when
working on the machine with two persons or more.
• Verify that nobody is within or near the machine before
operating the machine. Operating the machine may cause
injury to the person who is carrying out maintenance.
• [Example]
If one person moves the device table while another person is
exchanging a feeder, the latter may be injured.
Do not approach a machine that has stopped moving.
• There are times during automatic operation when the machine
may appear to have stopped while it is waiting for a board,
waiting for the next machine, reading marks, transmitting data,
etc. In such cases, once certain conditions are fulfilled, the
machine will begin moving again automatically, so care should
be taken. Only approach the machine after the EMERGENCY
STOP button has been pressed. When the message "Ready"
displays at the machine display, the machine will begin to
move once certain conditions are satisfied.
• Keep in mind that the machine will begin to move regardless
of whether these conditions are satisfied intentionally or
inadvertently.
Resupply solder paste, glue and parts while the machine is
in manual mode.
• Never resupply solder, glue or parts during automatic
operation unless instructed otherwise. Body parts or clothing
may be caught in the machine causing personal injury.
Do not place hands near the main conveyor.
• Hands or other body parts may be caught in the machine.
WARNING