SYS-CP842-1.1E.pdf - 第193页
4.Commands SYS-CP842-1.1E 184 CP-842E / CP-842ME System Reference Wide Camera Nozzle Check Command Path: [Nozzle Check ] - [W ide Camera] Press to display the resu lts for the wide camera. Revision history: X-axis Positi…
SYS-CP842-1.1E 4.Commands
CP-842E / CP-842ME System Reference 183
Vision Command bar (All Screens)
Command Path: [Vision]
Press to display a dialog box which allows for selection of the camera used to acquire
the image displayed at the machine monitor.
Revision history:
Vision Error Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Vision Error]
Press to execute a forced device check when a parts out condition, a pickup error, or a
vision processing error occurs.
Revision history:
Vision Error Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Vision Error]
Press to perform a changeover to the next device when a parts out condition, a pickup
error, or a vision processing error occurs.
Revision history:
Vision System Maintenance
Command Path: [Maintenance] - [Vision System]
Press to access the screen at which the vision system related commands can be
selected.
Revision history:
Warranty Options
Command Path: [Maintenance] - [Options] - [Warranty]
Press to access the screen at which machine and software warranty related informa-
tion displays.
Revision history:
4.Commands SYS-CP842-1.1E
184 CP-842E / CP-842ME System Reference
Wide Camera Nozzle Check
Command Path: [Nozzle Check] - [Wide Camera]
Press to display the results for the wide camera.
Revision history:
X-axis Position
Command Path: [Position] - [X-axis]
Press to select the X-axis as the target axis for movement. Select [X-axis] and enter
the required coordinates at [Program Coordinates] or [Servo Coordinates].
Revision history:
Y-axis Position
Command Path: [Position] - [Y-axis]
Press to select the Y-axis as the target axis for movement. Select [Y-axis] and enter
the required coordinates at [Program Coordinates] or [Servo Coordinates].
Revision history:
SYS-CP842-1.1E 5.I/O Map
CP-842E / CP-842ME System Reference 185
5. I/O Map
The input and output addresses of each machine-type are listed in this part.
5.1 Standard Input and Output Signals
5.1.1 Standard Input Signals
Input-1
Addre
ss
Signal Name Description Signal Status at I/O
Screen
X000 START SWITCH1 Side1 Start button Button on: O
X001 READY ON 1 READY ON 1 Button on: O
X002 CYCLE STOP Cycle stop button Button on: X
X003 INCHING KEY UP1 Side1 Up inching key Button on: O
X004 INCHING KEY DOWN1 Side1 Down inching key Button on: O
X005 INCHING KEY RIGHT1 Side1 Right inching key Button on: O
X006 INCHING KEY LEFT1 Side1 Left inching left key Button on: O
X007 INCHING KEY CW1 Side1 Clockwise inching key Button on: O
X008 INCHING KEY CCW1 Side1 Counterclockwise inching
key
Button on: O
X009 SHIFT KEY 1 Side1 Shift key Button on: O
X00A Side1 ENABLE Side1 Enable Side 1 enabled: O
X00B Side1 LOCK Side1 Fix operation Side 1 locked: O
X00C CAM AXIS ABS SETUP
COMPLETE
Cam-axis ABS setup complete Setup complete: O
X00D X AXIS ABS SETUP COMPLETE X-axis ABS setup complete Setup complete: O
X00E START SWITCH2 Side2 Start button Button on: O
X00F READY ON 2 Side2 Ready on button Button on: O
X010 Y AXIS ABS SETUP COMPLETE Y-axis ABS setup complete Setup complete: O
X011 INCHING KEY UP2 Side2 Up inching key Button on: O
X012 INCHING KEY DOWN2 Side2 Down inching key Button on: O
X013 INCHING KEY RIGHT2 Side2 Right inching key Button on: O
X014 INCHING KEY LEFT2 Side2 Left inching left key Button on: O
X015 INCHING KEY CW2 Side2 Clockwise inching key Button on: O
X016 INCHING KEY CCW2 Side2 Counterclockwise inching
key
Button on: O