SYS-CP842-1.1E.pdf - 第96页

SYS-CP842-1.1E 3.Machine System CP-842E / CP-842ME System Reference 87 Screen Button Explanations A. [Sequence Number]: Displays a ten-key pad where the desir ed sequence number (s earch object) ca n be entered. B. [Refe…

3.Machine System SYS-CP842-1.1E

86 CP-842E / CP-842ME System Reference

Sequence Search 2 Screen

Click the [ZOOM +] button on the sequence search screen to zoom in (enlarge) on the

modeling object. The desired sequence can then be selected from the modeling object.

Specify the sequence number.

FUJI

Error

Operator

JOG:X Y CAM

Servo Count

GEMCCD Monitor

Search SequenceFUJI_CP7_2001

Front

Sequence

Number

Reference

Designator Search

C87

ZOOM +

ZOOM -

Move Cursor

Set Switch

CP7S2011E

C D H O

SYS-CP842-1.1E 3.Machine System

CP-842E / CP-842ME System Reference 87

Screen Button Explanations

A. [Sequence Number]: Displays a ten-key pad where the desired sequence

number (search object) can be entered.

B. [Reference Designator

Search]:

Displays a ten-key pad where the desired reference

designator (search object) can be entered.

C. [ ] (Leftward cursor

movement):

If the part for the specified sequence is not

displayed, this key changes the sequence number

to that of the upper right part. If the specified

sequence part is displayed, this key changes the

sequence number to that of the part to the left. If

there is no part to the left, the sequence number is

changed to that of the lower right part. If the

sequence number of the lower left part is specified,

this key changes the sequence number to that of the

upper right part again.

D. [ ] (Rightward cursor

movement):

If the part for the specified sequence is not

displayed, this key changes the sequence number

to that of the upper right part. If the specified

sequence part is displayed, this key changes the

sequence number to that of the part to the right. If

there is no part to the right, the sequence number is

changed to that of the upper left part. If the

sequence number of the top right part is specified,

this key changes the sequence number to that of the

bottom left part.

E. [Horizontal scroll box]: Scrolls through the modeling display area in the

horizontal direction. A drag-and-drop can be

performed to scroll to a desired position.

F. [Horizontal scroll left arrow]: Scrolls through the modeling display area in 1mm

units in the left horizontal direction.

G. [Horizontal scroll gray

pattern]:

Scrolls through the modeling display area in the

horizontal direction in 1-screen units.

H. [Horizontal scroll right arrow]: Scrolls through the modeling display area in 1mm

units in the right horizontal direction.

I. [Vertical scroll box]: Scrolls through the modeling display area in the

vertical. A drag-and-drop can be performed to scroll

to a desired position.

J. [Vertical scroll up arrow]: Scrolls through the modeling display area in 1mm

units in the upward vertical direction.

K. [Vertical scroll gray

pattern]:Scrolls through the

modeling display area in the

vertical direction in 1-screen

units.

L. [Vertical scroll down arrow]: Scrolls through the modeling display area in 1mm

units in the downward vertical direction.

M. [ZOOM +]: Zooms in on the modeling object.

N. [ZOOM -]: Zooms out from the modeling object.

3.Machine System SYS-CP842-1.1E

88 CP-842E / CP-842ME System Reference

Specifying A Sequence

The vicinity of the specified sequence part can be displayed by using the cursor movement

buttons, by touching the screen directly, by using the horizontal scrollbar, or by using the

zoom buttons. After displaying the part vicinity, the specified sequence part can be

displayed by using cursor movement buttons or by touching the screen directly. The

specified part displays in red.

O. [Close]: Returns to either the simulation or the test

placement screen (returns to the screen from which

this screen was accessed).