SYS-CP842-1.1E.pdf - 第217页
5.I/O Map SYS-CP842-1.1E 208 CP-842E / CP-842ME System Reference MEMO:
SYS-CP842-1.1E 5.I/O Map
CP-842E / CP-842ME System Reference 207
Servo input-12
Address Display Description
SX058 Not used
SX059 Not used
SX05A Not used
SX05B NY AXIS AMP OK NY-axis servo amp normal
SX05C Not used
SX05D Not used
SX05E Not used
SX05F Not used
5.I/O Map SYS-CP842-1.1E
208 CP-842E / CP-842ME System Reference
MEMO:
SYS-CP842-1.1E 6.System Installation
and Upgrade
CP-842E / CP-842ME System Reference 209
6. System Installation and Upgrade
System installation and upgrade procedures are described in this part.
6.1 System Installation
The following procedure should be followed when installing both the system and application
software.
Note: Always transmit Proper data to the host computer before installing the system software. All data is
cleared from the machine during installation.
6.1.1 BIOS Settings
Verify the BIOS settings as described below before reinstalling Windows NT and the
system applications.
1. Connect the keyboard to the connector at the front of the machine.
2. Turn the machine power on. When the message Press <F2> to enter SETUP displays,
press the [F2] key on the keyboard to display the BIOS setting screen.
a. Use the left and right arrow keys to switch between menu screens.
b. Use the up and down arrow keys to select the desired item.
c. Press [ENTER] to display submenus. (At the System Date and System Time
settings, the [ENTER] key is used to switch between the Hour, Minute, and Second
settings.)
d. Use the [-]/[+] keys or the SPACE key to change setting values shown in brackets.
e. To return to the [Main] menu, press the ESC key.
An explanation of the necessary settings follows.