SYS-CP842-1.1E.pdf - 第93页
3.Machine System SYS-CP842-1.1E 84 CP-842E / CP-842ME System Reference Sequence Search Screen The sequence for which a simulation or test pl ac ement is desired is selected on this scr een. Screen Button Explana tions Di…
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 83
a. If started when there is no panel present, a panel is loaded, a part is placed, an image
of the placed part position is acquired by the mark camera and displayed on the
monitor. Operation then stops.
4. Specifying the initial sequence
a. The initial sequence can be specified if a panel has been loaded to the main
conveyor but test placement is not occurring.
5. Panel unloading
a. A panel is not unloaded after production is completed. The [Unload] button must be
pressed to unload the panel.
b. A completed panel which is on the main conveyor is automatically unloaded if the
START button is pressed.
c. To perform another test placement after a test placement and simulation have been
completed, press the [Unload] button to unload the panel, then perform another test
placement.
6. Saving the production program
a. When the [Close] button is clicked after editing a production program, a dialog box
displays inquiring if the production program is to be saved. If saved, production
program overwriting occurs. If not saved, the edited content is abandoned.
3.Machine System SYS-CP842-1.1E
84 CP-842E / CP-842ME System Reference
Sequence Search Screen
The sequence for which a simulation or test placement is desired is selected on this screen.
Screen Button Explanations
Display Item Explanations
Specifying A Sequence
A sequence can be specified in the following 3 ways.
Specify the sequence number.
FUJI
ErrorOperator
JOG:X Y CAM
Servo CountGEMCCD Monitor
Sequence SearchFUJI_CP7_2001
Front
Close
123
Sequence Number
ZOOM +
ZOOM -
Move Cursor
Reference
Designation Search
MIN
Set Switch
CP7S2010E
AB
C
1
D
A. [Sequence No.]: Displays a ten-key pad where the desired
sequence number (search object) can be
entered.
B. [Reference Designator Search]: Displays a ten-key pad where the desired
referencedesignator (search object) can be
entered.
C. [ZOOM+]: Zooms in and enables image scrolling, and
sequence cursor movement.
D. [Close]: Returns to either the simulation or the test
placement screen (returns to the screen from
which this screen was accessed).
1. [Monitoring Preview] Displays the panel position of the sequence number indicated
by the [Sequence No.] item (item A. above).
SYS-CP842-1.1E 3.Machine System
CP-842E / CP-842ME System Reference 85
1. By entering the sequence number directly.
2. By entering a reference desighnator.
3. By moving the cursor to the desired position on the modeling object.
A. Click the [Sequence No.] button to display a ten-key pad, then enter the desired
sequence number. If the modeling object is enabled, the part for the specified
sequence displays on the modeling object.
B. Click the [Reference Designator] button to display a ten-key pad, then enter the
search object reference designator. If the modeling object is enabled, the part for
the specified sequence displays on the modeling object.
C. Click the [ZOOM+] button to enable the modeling object. The procedure for
specifying a sequence using the modeling object is explained on the following
page (Sequence Search 2 Screen).