FlexTRAK 2MB Material Handler Addendum Rev 05.pdf - 第114页
FlexTRAK Series 2MB Mater ial Handler Adden dum Operations 6-10 © 2023 Nordson Corporation To stop in auto mode via abort on the MH over view screen: 1. Click the ABORT button from th e MH Overview screen (Figure 6-7). „…
FlexTRAK Series 2MB Material Handler Addendum Operations
© 2023 Nordson Corporation 6-9
„ The chamber will not accept new pieces, but the conveyors will continue to load and
unload parts.
?
NOTE If there are unprocessed parts waiting to be placed in the chamber, then the
conveyors will be stalled until the FlexTRAK-2MB is resumed.
2. Touch the START button on the PM Overview screen (Figure 6-7) to resume processing.
To stop in auto mode via purge on the MH overview screen:
1. Click the PURGE button on the MH Overview screen (Figure 6-7).
„ The material handler stops accepting new process carriers and purges remaining
workpieces from the system.
„ All process carriers within the system will be plasma processed before exiting.
„ ID Tracking information is retained.
„ The Lot Complete dialog box opens once the last process carrier has exited the system.
Information about the lot number and process carrier count is displayed (Figure 6-8).
2. Click ACKNOWLEDGE in the Lot Complete dialog box to exit.
Figure 6-8 Lot Complete Dialog Box
To stop in auto mode via pause on the MH overview screen:
1. Click the PAUSE button on the MH Overview screen (Figure 6-7)
„ The system temporarily stops.
„ Boat ID tracking information is retained. Tracking will continue after system operations
have resumed.
„ The Pause Mode Active dialog box opens (Figure 6-9)
2. Click RESUME in the Pause Mode Active dialog box to acknowledge and continue system
operations.
Figure 6-9 Pause Mode Active Dialog Box
FlexTRAK Series 2MB Material Handler Addendum Operations
6-10 © 2023 Nordson Corporation
To stop in auto mode via abort on the MH overview screen:
1. Click the ABORT button from the MH Overview screen (Figure 6-7).
„ The system stops the current lot in progress.
„ The material handler will complete its last commands and then come to a complete
stop.
„ Boat tracking ID's will be disabled. Boat ID tracking information is NOT retained, and
all workpieces left in the system have to be manually removed.
„ The Material Handling Alarm dialog box opens, indicating that the process has been
aborted (Figure 6-10).
2. Touch the SILENCE button to silence the alarm.
3. Touch the CONTINUE or REJECT button to acknowledge the alarm.
„ Stopping the material handler in this manner will require the manual unload of all
remaining parts in order to resume.
Figure 6-10 Material Handling Alarm Dialog Box
FlexTRAK Series 2MB Material Handler Addendum Operations
© 2023 Nordson Corporation 6-11
6.7 Manual Mode
?
NOTE This section is intended for process engineering and maintenance personnel operating the
2MB material handler manually.
Manual mode operation is typically used for testing purposes, teaching axis positions, or troubleshooting.
Manual mode provides the same control over MH movement as automatic mode but requires the operator
to initiate each sequential step.
6.7.1 Operating in Manual Mode
To operate in manual mode:
1. Power on the system.
„ The system computer will start and the FlexTRAK MH Overview screen will be
displayed on the monitor.
2. Log into the system, Refer to the FlexTRAK Installation, Operations, and Maintenance
Manual.
„ At start-up, the plasma module will default to the previous running mode (automatic
mode, stop mode or manual mode).
„ The current mode will be highlighted in green.
3. If the system is not in stop mode, press the STOP button.
„ At start-up, the MH will default to the stop mode.
?
NOTE In order for the system to start, the chamber lid must trigger the chamber up
switch and both grippers must be open. If a gripper is closed, the assembly must
be manually moved toward the home position.
4. Touch the MANUAL button on the PM Overview screen to open the MH Overview screen
(Figure 5-4).
5. To enter manual mode, click the MANUAL MODE button. The button will change from a
yellow to a green highlight.
„ The MH is now in manual mode, see 5.4 Material Handler Overview Screen.
6. Open the FlexTRAK-2MB’s front door to manually load the workpieces.