FlexTRAK 2MB Material Handler Addendum Rev 05.pdf - 第99页
FlexTRAK Series 2MB Mater ial Handler Adden dum Tour of HMI Softw are for the Material Handler © 2023 Nordson Corporation 5-33 Control Description US BA Displays the status of the up stream BA sensor. US MR Displays the …
FlexTRAK Series 2MB Material Handler Addendum Tour of HMI Software for the Material Handler
5-32 © 2023 Nordson Corporation
Table 5-16 Conveyor Status Screen Controls and Indicators
Control Description
MANUAL Touch to switch to Manual mode.
LANE 2
LOAD LANE 2 Touch to load Lane 2.
LOAD IN: Displays the load in status.
UNLOAD LANE 2 Touch to unload Lane 2.
UNLD OUT: Displays the unload out status.
US BA Displays the status of the upstream BA sensor.
US MR Displays the status of the upstream MR sensor.
DETECT 1 Displays the status of the Detect 1 sensor.
DETECT 2 Displays the status of the Detect 2 sensor.
DETECT 3 Displays the status of the Detect 3 sensor.
DETECT 4 Displays the status of the Detect 4 sensor.
STOP UP Displays the status of the Stop Up sensor.
STOP DN Displays the status of the Stop Down sensor.
DETECT 5 Displays the status of the Detect 5 sensor.
MOTOR 2 SPEED Displays the speed of Motor 2 (mm/sec).
DS MR Displays the status of the downstream MR.
DS BA Displays the status of the downstream BA.
SETPOINTS
LOAD SPEED
Displays the Load Speed setpoint.
Touch to edit the Load Speed setpoint.
LANE SPEED
Displays the Lane Speed setpoint.
Touch to edit the Lane Speed setpoint.
JOG SPEED
Displays the Jog Speed setpoint.
Touch to edit the Jog Speed setpoint.
LANE SPEED
Displays the Lane Speed setpoint.
Touch to edit the Lane Speed setpoint.
UNLOAD SPEED
Displays the Unload Speed setpoint.
Touch to edit the Unload Speed setpoint.
NEXT PART DELAY
Displays the Next Part Delay setpoint.
Touch to edit the Next Part Delay setpoint.
LOAD IN TIME
Displays the Load In setpoint.
Touch to edit the Load In setpoint.
HS UNLOAD TIME
Displays the Hs unload setpoint.
Touch to edit the Hs Unload setpoint.
BOAT OUT DELAY
Displays the Boat Out Delay setpoint.
Touch to edit the Boat Out Delay setpoint.
LANE 1
LOAD LANE 1 Touch to load Lane 1.
LOAD IN: Displays the status of the load in sensor.
UNLOAD LANE 1 Touch to unload Lane 1.
UNLD OUT: Displays the status of the unload out sensor.
FlexTRAK Series 2MB Material Handler Addendum Tour of HMI Software for the Material Handler
© 2023 Nordson Corporation 5-33
Control Description
US BA Displays the status of the upstream BA sensor.
US MR Displays the status of the upstream MR sensor.
DETECT 1 Displays the status of the Detect 1 sensor.
DETECT 2 Displays the status of the Detect 2 sensor.
DETECT 3 Displays the status of the Detect 3 sensor.
DETECT 4 Displays the status of the Detect 4 sensor.
STOP UP Displays the status of the Stop Up sensor.
STOP DN Displays the status of the Stop Down sensor.
DETECT 5 Displays the status of the Detect 5 sensor.
MOTOR 1 SPEED Displays the speed of Motor 1 (mm/sec).
DS MR Displays the status of the downstream MR.
DS BA Displays the status of the downstream BA.
SEPARATOR
CONVEYOR HOME Displays the status of the Conveyor Home sensor
POSITION
Displays the position of the separator using on the following:
Moving
Conveyance
Shuttle Transfer
CONVEYANCE Touch to switch from Grip Position to Conveyance.
GRIP POS. Touch to switch from Conveyance to Grip Position.
MOTOR CONTROL
MANUAL SPEED
Displays the Manual Speed setting. Touch to edit the Manual Speed
setting.
MTR 2 MANUAL
Displays the control mode of Motor 2. Touch to toggle between
Manual and Auto control of Motor 2.
MTR 1 MANUAL
Displays the control mode of Motor 1. Touch to toggle between
Manual and Auto control of Motor 1.
5.5.5 Parameters Screen
The Parameters screen (Figure 5-15) displays the system parameters and options of the current machine
configuration. See Table 5-17 for descriptions of the Parameters screen controls and indicators.
To access the parameters screen:
1. Touch the MAINTENANCE button on the MH Overview screen to access maintenance
commands.
„ The Maintenance Master screen opens (Figure 5-5).
2. Touch the SYSTEM button.
„ The Parameters screen opens (Figure 5-15).
FlexTRAK Series 2MB Material Handler Addendum Tour of HMI Software for the Material Handler
5-34 © 2023 Nordson Corporation
Figure 5-15 Parameters Screen
Table 5-17 Parameters Screen Controls and Indicators
Control Description
ERROR COUNT DATA Touch to open the Alarm Counts screen (Figure 5-17).
OPTIONS
MANUAL ALARMS
Touch to enable/disable the Manual Alarms software feature.
Disabled: Disables the Manual alarms.
Enabled: Enables the Manual alarms.
PASSTHROUGH
Touch to enable/disable the Passthrough software feature.
Disabled: Disables the Manual alarms.
Enabled: Enables the Manual alarms.
BA LOW CANCEL
Touch to enable/disable the BA Low Cancel software feature.
Disabled: Disables the Manual alarms.
Enabled: Enables the Manual alarms.
GRIPPERS
Touch to enable/disable the Grippers software feature.
Disabled: Disables the Manual alarms.
Enabled: Enables the Manual alarms.
LANE 1
Touch to enable/disable the Lane 1 software feature.
Disabled: Disables the Manual alarms.
Enabled: Enables the Manual alarms.
LANE 2
Touch to enable/disable the Lane 2 software feature.
Disabled: Disables the Manual alarms.
Enabled: Enables the Manual alarms.
ENTER OPTION CODE
Touch to open the Option Code screen (for use by Technical Support
only).