FlexTRAK 2MB Material Handler Addendum Rev 05.pdf - 第117页
FlexTRAK Series 2MB Mater ial Handler Adden dum Operations © 2023 Nordson Corporation 6-13 13. Use the to ol to process and unloa d the workpiece. Figure 6-12 MH Overview Screen - Ma nual Mode 6.7.2 M anu ally Controllin…
FlexTRAK Series 2MB Material Handler Addendum Operations
6-12 © 2023 Nordson Corporation
7. The Material Handling Alarm dialog box opens (Figure 6-11). An alarm will sound
indicating that the E-Stop/Safety Cover is open. To silence the alarm, click SILENCE.
Figure 6-11 Material Handling Alarm Dialog Box
8. Load the untreated parts onto the conveyor and close the FlexTRAK-2MB’s front door. The
SAFETY COVER / E-STOP STATUS field will update to read CLOSED.
9. Touch the RESET button to acknowledge the Safety Cover Open alarm or touch the
CONTINUE button to acknowledge the MH alarm.
10. Using the manual controls, load the workpiece(s) into the plasma processing chamber.
11. Touch the Overview button to return to the FlexTRAK MH Overview screen (Figure 6-12).
12. If the system is not in manual mode, touch the MANUAL button.
„ If the system is in manual mode, the MANUAL button will be highlighted in green and
the AUTO button will be highlighted in red.
FlexTRAK Series 2MB Material Handler Addendum Operations
© 2023 Nordson Corporation 6-13
13. Use the tool to process and unload the workpiece.
Figure 6-12 MH Overview Screen - Manual Mode
6.7.2 Manually Controlling the Shuttler System
The Shuttle Manual screen provides manual control of the shuttler system when the MH is in Manual
mode.
Manual mode must be enabled to control and manipulate shuttler and conveyor movements. When the
system is not in manual mode, the MANUAL MOVES ENABLED radio button is red and the Shuttle
Manual screen controls are inactive (Figure 6-13).
Figure 6-13 Manual Moves Disabled
FlexTRAK Series 2MB Material Handler Addendum Operations
6-14 © 2023 Nordson Corporation
To manually control the shuttler system:
1. Touch the MANUAL button on the MH Overview screen to switch the MH to Manual
mode.
2. Touch the MAINTENANCE button to access maintenance commands.
3. Touch the SHUTTLER button.
„ The Axis Status screen opens (Figure 5-6).
4. Touch the SHUTTLE MOVE button.
„ The Shuttle Move screen opens (Figure 5-10).
5. Use the manual shuttle controls (Figure 6-14) to manipulate the upper and lower grippers
and the separator.
„ See Table 5-12 for descriptions of the controls and indicators.
Figure 6-14 Shuttle Manual Screen - Manual Enabled
6.7.3 Using the Process Cycle Mode (PCM) Control
Process Cycle Mode is a routine that will continuously run the material handling system for diagnostic
purposes, such as testing a new process carrier or cycling the system during down times.
?
NOTE The FlexTRAK system must be in Stop mode when operating PCM Control with CYCLE
CHAMBER disabled. The FlexTRAK system must be in automatic mode when operating
PCM Control with CYCLE CHAMBER enabled.