FlexTRAK 2MB Material Handler Addendum Rev 05.pdf - 第152页
FlexTRAK Series 2MB Material Handler Addendum Parts Replacement B-2 © 2023 Nordson C orporation B.3 Pa rts Ordering Information B.3.1 Placing Your Order Customers can order spare parts by contacting Te chnical Support. Y…
© 2023 Nordson Corporation B-1
B - Parts Replacement
B.1 Overview
This section includes general information for ordering recommended spares and
replacement parts for your 2MB Material Handler. Replacement part numbers are listed
in Table B-1 and Table B-2. Refer to the FlexTRAK Installation, Operations and
Maintenance manual for spares and replacement parts for the plasma module.
This section contains the following procedures:
q Parts Ordering Information
q Cleaning and Inspection
q Unpacking and Inspecting Replacement Parts
CAUTION! Operation of your plasma system involves heat, air pressure,
electrical power, mechanical devices, and the use of hazardous
materials. It is essential that every person servicing or operating the
plasma system fully understands all hazards, risks, and safety
precautions. Refer to Section 2 - Safety for additional information.
B.2 Record Keeping
The type of service performed should be recorded in the plasma system maintenance
records. Dates, part numbers/serial numbers of replaced parts, names of technicians,
and other pertinent data should be recorded.
CAUTION! Some part replacement procedures involve the use and
disposal of hazardous materials. Always follow the material manufacturer
SDS, facility requirements, and local regulations for protection of
personnel and disposal of materials.
FlexTRAK Series 2MB Material Handler Addendum Parts Replacement
B-2 © 2023 Nordson Corporation
B.3 Parts Ordering Information
B.3.1 Placing Your Order
Customers can order spare parts by contacting Technical Support. Your customer
service representative can take your order or assist you in setting up an account to
purchase spare parts through our Internet Web Store. When ordering parts, be
prepared to provide the following information:
Your Company Name
Billing Address
Shipping Address
Part Number and Description
Purc
ha
se
Order Number
Quantity
Dispensing System Serial Number
(found on back panel)
Shipping Instructions with Collect
Account Number
Note Find Technical Support information in the front of this manual or click on the
Nordson web page at: www.nordsdonmarch.com.
B.3.2 Shipping Instructions
When ordering parts, specify which carrier you prefer to use and provide your shipping
account number. If no instructions are received, Nordson will determine the best
shipping method and items will be shipped prepaid with the shipping charge added to
the invoice.
B.3.3 Parts Warranty
Contact Technical Support for any warranty issues pertaining to spare parts.
B.3.4 Credit and Exchanges
Contact Technical Support for credit or exchanges of recommended spare parts or
refurbished components (components restored to original specifications but not sold as
new).
B.4 Cleaning and Inspection
Always clean the area made visible after a failed part is removed from the plasma
system. Inspect the area for signs of what may have caused the part to fail. This may
help prevent future part damage.
While removing parts that will be reinstalled, visually inspect them for damage. If found
undamaged, retain them for reinstallation. Replace damaged parts and hardware as
appropriate.
FlexTRAK Series 2MB Material Handler Addendum Parts Replacement
© 2023 Nordson Corporation B-3
B.5 Unpacking and Inspecting Replacement Parts
Replacement parts are shipped to distributor or customer facilities in individual shipping
cartons. Review the packing slip to ensure that the correct parts were received.
Contact Technical Support if any discrepancies are discovered.
Before unpacking your spare parts, visually inspect the carton for damage. If
applicable, check the shock sensors and the tip sensors for indications of improper
shipping and handling. Inform the freight carrier of any damage.
WARNING! Parts replacement should only be performed by a trained
service technician. Nordson assumes no liability for personal injury or
property damage that may occur as a result of spare parts being
replaced by a non-certified technician.
B.6 Spare Parts List
This section contains a list of item numbers corresponding to the part description. Review the
spare parts kits Excel file for item number referencing the part number when ordering
replacement parts for the FlexTRAK 2MB Material Handler. Contact Technical Support for
questions.