FlexTRAK 2MB Material Handler Addendum Rev 05.pdf - 第66页
在线预览 FlexTRAK 2MB Material Handler Addendum Rev 05.pdf PDF 文档。
FlexTRAK Series 2MB Material Handler Addendum System Components
© 2023 Nordson Corporation 4-21
Figure 4-19 Gripper Arm and Fingers with Detection Switches for Large Process Carriers
© 2023 Nordson Corporation 5-1
5 Tour of HMI Software for the Material
Handler
5.1 Overview
This section provides a tour of the FlexTRAK 2MB material handling HMI screens. The FlexTRAK
plasma module HMI screens are covered in the HMI Software User Guide. A detailed description of the
screens found within each of the following:
q User Interface
q Material Handler Overview Screen
q Maintenance Master Screen
q Axis Status Screen
q Digital Input Status Screen
q Digital Output Status Screen
q Conveyor Status Screen
q Parameters Screen
q Reset User Count Screen
q Alarm Counts Screen
q Variable Snapshot Screen
All of the HMI screens can be accessed through the FlexTRAK 2MB MH Overview screen. These screens
are used to:
q Enable Manual Mode
q Control Movements of the MH Shuttler and Conveyor
q View Shuttler and Conveyor Set Points
q Enable Teach Mode
q View Digital I/O’s
q View and Set General MH System Parameters
q Run Programs such as PCM Control and Pass-Through Mode
5.2 Safety First
Please review the safety section in the applicable plasma system manual before proceeding. It is important
to be familiar with the plasma system safety features and precautions indicated in the manual before
operating the HMI software.