Spectrum+Operating+Manual.pdf - 第44页

S2-9 XX X Se ri es Disp ensi n g Syst em IOM Man ual Safety 2-12 © 2023 Nordson Corporatio n I tem Des cription 1 Hand Enta ngleme nt Label 2 Hot S urface Label Figure 2-7 Safety War ning La bels - Rear Ca binet Item Des…

100%1 / 222
S2-9XXX Series Dispensing System IOM Manual Safety
© 2023 Nordson Corporation 2-11
Item
Description
1 Hot Surface Label (if heaters present)
2 Moving Parts Present Label
Figure 2-5 Safety Warning Labels - Conveyor
Item
Description
1 Clean Dry Air Warning Label
Figure 2-6 Safety Warning Label - Rear
2
1
1
S2-9XXX Series Dispensing System IOM Manual Safety
2-12 © 2023 Nordson Corporation
Item
Description
1 Hand Entanglement Label
2 Hot Surface Label
Figure 2-7 Safety Warning Labels - Rear Cabinet
Item Description
1 Electrical Warning Label
Figure 2-8 Safety Warning Labels - Power Manager
1
1
2
S2-9XXX Series Dispensing System IOM Manual Safety
© 2023 Nordson Corporation 2-13
2.11 Residual Safety Risks
Safety Hazard
Risk Area
A hand crush or pinch point hazard is created by
the movement of the conveyor. DO NOT reach into
the conveyor while the system is operating. Keep
hands away from this area unless the system power
is off.
A high risk burn hazard is created by the heaters.
Keep hands away from this area unless the system
power is off and heaters have cooled.
If the system is equipped with a Class 2 laser height
sensor, serious eye injury may occur by staring
directly into the laser beam on the laser height
sensor. The laser height sensor is located behind
the camera and not visible from the front of the
machine. DO NOT bypass the safety interlock. DO
NOT open the dispensing area door while the laser
is on. Wear protective goggles when using the laser
height sensor, see 2.8 Laser Radiation.
A hand entanglement hazard is created by the
movement of the drive cables and motor pulley.
DO NOT remove the access panels while the
system is operating. DO NOT bypass the safety
interlock. DO NOT operate the equipment with the
access panels removed and/or doors open. Keep
hands away from this area unless the system power
is off.
Item
Description
Item
Description
1
Conveyor
3
Laser Beam
3
Heaters
4 Drive Cables and Motor Pulley
Figure 2-9 S2-9XXX Safety Hazard Areas
1
2
4
3