Aimex3C系统手册.pdf - 第12页

目录 SYS-AIMEX3C-007S0 vi AIMEX III/AIMEX IIIc 系统手册 8.2.11 更换工作头时的 校正时间缩短功能 .............................. ............ .................................... . 260 8.2.12 防止供料器的按 钮操作引起的吸嘴落 下的设定 .............................…

100%1 / 365
SYS-AIMEX3C-007S0 目录
AIMEX III/AIMEX IIIc 系统手册
v
7.2 启动辅助软件.....................................................................................................................................219
7.3 在线监视器.........................................................................................................................................220
7.3.1 画面上显示的项目和含义 ...............................................................................................220
7.4 影像处理错误的分析 ........................................................................................................................223
7.4.1 画面上显示的项目和意思 ...............................................................................................223
7.4.2 影像处理错误的监视设定 ...............................................................................................225
7.5 警告系统 .............................................................................................................................................226
7.5.1 警告监视器的显示............................................................................................................226
7.5.2 画面上显示的项目和意思 ...............................................................................................226
7.5.3 确认正在发生的警告........................................................................................................227
7.5.4 警告信息的详细内容........................................................................................................228
7.5.5 警告记录的一览表显示....................................................................................................228
7.5.6 成功率的设定 ....................................................................................................................229
7.6 白板 （Whiteboard）......................................................................................................................230
7.6.1 启动白板.............................................................................................................................230
7.6.2 在白板上添加信息............................................................................................................231
7.6.3 编辑白板信息 ....................................................................................................................231
7.7 搜索错误 .............................................................................................................................................232
7.8 服务一览表.........................................................................................................................................233
7.8.1 服务一览表的显示............................................................................................................233
7.8.2 Fuji Realtime Workingrate Buffer Service 安装的下载 .......................................234
7.9 取得自动跟踪.....................................................................................................................................235
7.9.1 自动跟踪画面的显示........................................................................................................235
7.9.2 画面上显示的项目和意思 ...............................................................................................235
7.9.3 进行自动跟踪取得的设定 ...............................................................................................236
7.9.4 自动跟踪取得中的机器画面 ...........................................................................................236
7.9.5 下载跟踪数据 ....................................................................................................................237
8. 各种功能的设定和管理.....................................................................................................239
8.1 启动机器设定软件.............................................................................................................................239
8.2 机器功能设定.....................................................................................................................................240
8.2.1 吸嘴清扫功能设定............................................................................................................242
8.2.2 IPS 尘埃检测功能设定.....................................................................................................242
8.2.3 料盘吸取开始点和前进方向的设定...............................................................................243
8.2.4 设定料盘吸取开始点的基准坐标...................................................................................247
8.2.5 自动换线功能设定 （条形码 ID 模式）........................................................................248
8.2.6 自动换线功能设定 （手持式扫描器模式）..................................................................250
8.2.7 电路板停止位置补正功能设定 .......................................................................................251
8.2.8 料盘单元 -LTW 补充动作设定.......................................................................................253
8.2.9 料盘动态次料站补充功能的设定...................................................................................255
8.2.10 多功能生产运用的设定....................................................................................................259
oNnLLVIq
oNnLLVIq
Downloaded at 2017/10/30 17:10:21 by 307B1555 DL#XAxe7m6U
Downloaded at 2017/10/30 17:10:21 by 307B1555 DL#XAxe7m6U
目录 SYS-AIMEX3C-007S0
vi AIMEX III/AIMEX IIIc 系统手册
8.2.11 更换工作头时的校正时间缩短功能............................................................................... 260
8.2.12 防止供料器的按钮操作引起的吸嘴落下的设定.......................................................... 261
8.2.13 设定补充向导的优先显示 ............................................................................................... 262
8.2.14 切换次料站时的元件剩余数确认功能设置 .................................................................. 263
8.2.15 周期优先时的供料器的更换向导设定 .......................................................................... 264
8.3 设定模组功能..................................................................................................................................... 265
8.3.1 吸嘴统计异常功能设定 ................................................................................................... 267
8.3.2 模组故障时的运用功能设定........................................................................................... 267
8.3.3 自动支撑销设定................................................................................................................ 268
8.3.4 混合校正功能设定............................................................................................................ 268
8.3.5 设定进行废料带箱清扫向导的生产电路板块数.......................................................... 269
8.3.6 LCR 检查设定.................................................................................................................... 270
8.3.7 设定元件废弃动作............................................................................................................ 271
8.3.8 吸嘴不良检测功能设定 ................................................................................................... 272
8.4 获取机器信息..................................................................................................................................... 273
8.4.1 获取跟踪数据.................................................................................................................... 273
8.4.2 获取影像信息.................................................................................................................... 273
8.5 远程操作............................................................................................................................................. 274
8.5.1 更新单元软件版本............................................................................................................ 274
8.5.2 更新控制软件版本............................................................................................................ 274
8.5.3 设定生产模式.................................................................................................................... 274
8.5.4 校正搬运轨道.................................................................................................................... 275
8.5.5 完成吸嘴维修保养............................................................................................................ 276
8.5.6 强制解除异常.................................................................................................................... 276
8.5.7 IPS 亮度调整指定............................................................................................................. 277
9. 各种软件工具的使用方法 ................................................................................................279
9.1 Image Viewer .................................................................................................................................. 280
9.1.1 安装 Image Viewer ........................................................................................................ 280
9.1.2 通过 Image Viewer 检查影像....................................................................................... 280
9.2 NetworkSetting .............................................................................................................................. 281
9.2.1 网络设定的变更................................................................................................................ 281
9.3 VersionUp......................................................................................................................................... 282
9.4 EmergencyInstaller........................................................................................................................ 283
9.4.1 准备作业 ............................................................................................................................ 284
9.4.2 Installer 的操作 ............................................................................................................... 284
9.5 TcpIpSetting..................................................................................................................................... 287
9.5.1 准备作业 ............................................................................................................................ 288
9.5.2 设定步骤 ............................................................................................................................ 288
9.6 Motion Adjustment Tool ............................................................................................................. 290
9.6.1 Motion Adjustment Tool 的安装............................................................................... 290
oNnLLVIq
oNnLLVIq
Downloaded at 2017/10/30 17:10:21 by 307B1555 DL#XAxe7m6U
Downloaded at 2017/10/30 17:10:21 by 307B1555 DL#XAxe7m6U
SYS-AIMEX3C-007S0 目录
AIMEX III/AIMEX IIIc 系统手册
vii
9.6.2 Motion Adjustment Tool 的开始 ...............................................................................290
9.6.3 状态参照功能的操作........................................................................................................292
9.6.4 调整功能的操作 ................................................................................................................294
9.7 Equipment Check...........................................................................................................................295
9.7.1 安装 Equipment Check.................................................................................................295
9.7.2 确认生产线上的机器........................................................................................................296
9.7.3 确认生产线外的机器........................................................................................................297
9.7.4 通过传感器、I/O 确认故障状态....................................................................................298
9.7.5 确认各单元动作 ................................................................................................................300
9.7.6 确认料盘单元 -LTW 的固有值.......................................................................................301
9.7.7 指令列表 （料盘单元 -LTW）........................................................................................301
9.7.8 指令列表 （搬运轨道）....................................................................................................303
9.7.9 定位单动动作 ....................................................................................................................304
9.7.10 参照单元配置 ....................................................................................................................305
9.8 MEdit ..................................................................................................................................................309
9.9 IPS Viewer.........................................................................................................................................310
9.9.1 安装 IPS Viewer...............................................................................................................310
9.9.2 IPS Viewer 的画面...........................................................................................................311
9.9.3 IPS Viewer 的基本操作 ..................................................................................................311
9.9.4 判定结果的看法 ................................................................................................................314
10. 更新软件版本 .....................................................................................................................323
10.1 更新控制软件版本.............................................................................................................................323
10.1.1 使用辅助软件时 ................................................................................................................323
10.1.2 使用 VersionUp.exe 时 ..................................................................................................325
10.2 更新单元软件版本.............................................................................................................................328
11. 故障排除..............................................................................................................................331
11.1 故障排除的要点.................................................................................................................................331
11.2 显示错误信息.....................................................................................................................................331
11.3 常见问题的故障排除 ........................................................................................................................332
11.3.1 定位点的影像处理错误....................................................................................................332
11.3.2 元件影像处理错误............................................................................................................333
11.3.3 元件的吸取错误 ................................................................................................................334
11.3.4 贴装精度不良 ....................................................................................................................336
11.3.5 电路板搬运错误 ................................................................................................................337
11.3.6 发生缺件时 ........................................................................................................................338
11.3.7 搬运轨道端口的电路板检测错误...................................................................................339
11.3.8 译码器备份错误 ................................................................................................................339
11.3.9 电脑系统的故障 ................................................................................................................340
11.4 Fuji Flexa, Fujitrax 的故障排除.....................................................................................................344
oNnLLVIq
oNnLLVIq
Downloaded at 2017/10/30 17:10:21 by 307B1555 DL#XAxe7m6U
Downloaded at 2017/10/30 17:10:21 by 307B1555 DL#XAxe7m6U