3OM-1050-002.pdf - 第117页

4.2.4 "Setup Data" T ab • Sheet Layout When the "Setup Data" tab is pressed in the "Operation Data" tab sheet, the following tab sheet appears. Fig. 3B153 "Setup Data" T ab Sheet •…

100%1 / 321
4.2.3. "P.E.C. Recognition Mark Data" Tab
• Sheet Layout
When the "P.E.C. Recognition Mark Data" tab is pressed in the "Op-
eration Data" tab sheet, the following tab sheet appears.
Fig. 3B152 "P.E.C. Recognition Mark Data" Tab Sheet
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-
formation on how to enter parameters.
*1 Mark Type, Mark Size D1 [mm], Mark Size D2 [mm], Window
Size [mm], Mark Image, Mark Level, Recog Algo
*1
0110-003 2-95 AFO01EDTP
4.2 "Operation Data" Tab
4.2.4 "Setup Data" Tab
• Sheet Layout
When the "Setup Data" tab is pressed in the "Operation Data" tab
sheet, the following tab sheet appears.
Fig. 3B153 "Setup Data" Tab Sheet
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-
formation on how to enter parameters.
*1 L conveyor, R conveyor, X/Y table chute, and Support pin up/
down
*1
0110-003 2-96 AFO01EDTP
4.2 "Operation Data" Tab
4.3 "Placement Feeder Location" Tab
4.3.1 "Feeder Carriage" Tabs
• Sheet Layout
When the "Feeder Carriage #1" tab is pressed in the "Placement
Feeder Location" tab sheet, the following tab sheet appears.
Follow the same procedure to make the "Feeder Carriage #2",
"Feeder Carriage #3", or "Feeder Carriage #4" visible.
Fig. 3B154 "Feeder Carriage #1" Tab Sheet
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-
formation on how to enter parameters.
*1 [Component ID List] Icon
When this icon is pressed, the "Component ID List" window opens.
This window enables you to select a component ID from the com-
ponent library and allocate it to an arbitrary feeder (Fdr. No.)
Refer to "4.3.2 "Component ID List" Window" for details.
*1
*2 *3
*4
0210-004 2-97 AFO01EDTP
4.3 "Placement Feeder Location" Tab