3OM-1050-002.pdf - 第152页
3 . 2 "Shape Data" T ab 3.2.1 "Mold Size" T ab The corresponding tab sheet appears when "Cylindrical", "Square", "De- form (Simple)", "IC (Simple)", "IC Co…
*2 [Minimize], [Maximize], [Restore], and [Close] Buttons
[Minimize] Button (
)
Minimizing a window hides an edit window.
The contents (parameters) of the minimized window are kept un-
changed.
To open the hidden window, press the [DATA EDIT] button on the
menu bar and select "CMPNT LBRY" from the menu.
[Maximize] Button (
)
When an edit window is not at its maximum size, this button ap-
pears in the window’s upper-right corner.
When pressed, this enlarges the edit window to its maximum size.
[Restore] Button (
)
When an edit window is already at its maximum size, the [Maxi-
mize] button switches to the [Restore] button, which returns the
window to its previous size.
[Close] Button ( )
When pressed, this closes the active edit window.
*3 Edit Sheet
This sheet enables the operator to edit the parameters of the se-
lected component ID.
01 10-003 3-15
AFO01EDTP
3.1 Toolbar and Icons
3.2 "Shape Data" Tab
3.2.1 "Mold Size" Tab
The corresponding tab sheet appears when "Cylindrical", "Square", "De-
form (Simple)", "IC (Simple)", "IC Complex", "Connector (Simple)", "Con-
nector (Complex)", "Other Leaded (Simple)", or "Other Leaded (Com-
plex)" is selected in the "Component shape" text box.
• Sheet Layout
When the "Mold Size" tab is pressed in the "Shape Data" tab sheet,
the following tab sheet appears.
Fig. 3C9 "Shape Data" Tab Sheet ("Deform (Simple)" Selected)
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-
formation on how to enter each parameter.
(1) Component shape: Cylindrical, Square
*2 Mold size, *4 Polarity existence
01 10-003 3-16
AFO01EDTP
3.2 "Shape Data" Tab
*1
*2
*4
*3
01 10-003 3-17 AFO01EDTP
(2) Component shape: Deform (Simple)
*1 Component type, *2 Mold size, *3 Outward length,
*4 Polarity existence
(3) Component Shape: IC (Simple), IC (Complex),
Connector (Simple),
Connector (Complex),
Other Leaded (Simple),
Other Leaded (Complex)
*2 Mold size, *3 Outward length, *4 Polarity existence
3.2 "Shape Data" Tab