3OM-1050-002.pdf - 第245页
3.2.2 "Head" T ab The "Head" tab sheet is composed of "Head Origin", "Head Offset", and "Head Center Offset" tabs. • Sheet Layout When the "Head" tab is pressed…
0307-006 5-16 AFO01EDTP
*13 Support pin up/down [mm]
This is the offset value indicating the difference between the P.C.B.
thickness and the length of the support pin (actually measured value).
*14 Unit P.C.B. B.B.R.
X [mm], Y[mm]
This is the offset data used to correct the positional deviation of the
unit P.C.B. B.B.R. detection sensor.
X [mm] : Positional Correction Data in Horizontal Direction
Y [mm] : Positional Correction Data in Vertical Direction
3.2 "Device Offset" Tab
3.2.2 "Head" Tab
The "Head" tab sheet is composed of "Head Origin", "Head Offset", and
"Head Center Offset" tabs.
• Sheet Layout
When the "Head" tab is pressed in the "Device Offset" tab sheet, the
following tab sheet appears.
Fig. 3E17
• Sheet Composition
*1 "Head Origin" Tab
When selected, the "Head Origin" tab sheet appears.
*2 "Head Offset" Tab
When selected, the "Head Offset" tab sheet appears.
*3 "Head Center Offset" Tab
When selected, the "Head Center Offset" tab sheet appears.
0301-004 5-17
AFO01EDTP
*1
*2
*3
3.2 "Device Offset" Tab
(1) "Head Origin" Tab
• Sheet Layout
When the "Head Origin" tab is pressed in the "Head" tab sheet, the fol-
lowing tab sheet appears.
Fig. 3E18 "Head Origin" Tab Sheet
• Sheet Composition
*1 Head
The head Nos. are displayed.
0301-004 5-18
AFO01EDTP
*1
*2
3.2 "Device Offset" Tab