3OM-1050-002.pdf - 第25页

1 . 4 Composition of Placement Data The set parameters are used to place the components (IDs in the place- ment feeder location data) on the points with the specified coordinates in the designated direction. One step is …

1.3 Composition of Placement Feeder Location Data

The set parameters are used to determine which feeder slot Nos. (Fdr.

Nos.) various types of components should be allocated to.

The allocated component IDs (types) must be specified for each indi-

vidual feeder carriages.

Refer to "2.4 Placement Feeder Location Data" in "Section 2" for de-

tails.

B01 Feeder Carriages #1, #2, #3, and #4 Table 3B5

Reference No. Labels

B01_01 Fdr. No.

B01_02 Component ID

B01_03 C

B01_04 Comment

B01_05 Dual Fdr

B01_06 Feeder Fixed

B01_07 Feeder Alternate

B01_08 Fdr No.

1.3 Composition of Placement Feeder Location Data

0207-004 2 - 5 AFO01EDTP

1.4 Composition of Placement Data

The set parameters are used to place the components (IDs in the place-

ment feeder location data) on the points with the specified coordinates

in the designated direction.

One step is allocated for each component to be placed.

Refer to "2.5 Placement Data" in "Section 2" for details.

C01 Placement Data Un Table 3B6

Reference No. Labels

C01_01 Placement Data Unit Designation

C02 Placement Data (P Data) Table 3B7

Reference No. Labels

C02_01 Unit Control

C02_02 Unit P.C.B. B.B.R

C02_03 P-No.

C02_04 X, Y

C02_05 Z

C02_06 H

C02_07 Fdr. No.

C02_08 V

C02_09 C

C02_10 Comment

C02_11 X1, Y1

C02_12 X2, Y2

C02_13 FM1, FM2

C03 Placement Data (O) Table 3B8

Reference No. Labels

C03_01 O-No.

C03_02 X, Y

C03_03 Z

C03_04 C

C03_05 Comment

C03_06 B-X, B-Y

0207-004 2 - 6 AFO01EDTP

1.4 Composition of Placement Data

2. Pattern Program

2.1 Types of P.C.B.’s and Required Data

The following shows typical examples (applications) of each data.

Refer to the examples for creation of a pattern program.

Marks in "Required Data"

: This means that you must refer to the description of the

pattern program data and create the data correctly.

: This means that you must refer to the description of the

pattern program data and set "Disable" for the pertinent func-

tions.

(1) Single Pattern

Fig. 3B2

List of Required Data Table 3B9

Pattern Program

Required Data

Operation Data P.C.B. Data

P.C.B. Recognition Data

P.C.B. Recognition Mark Data

Setup Data Note (a)

Placement Feeder Feeder Carriages #1, #2, #3, and #4

Location Data

Placement Data U01 Placement Data Placement Data (P Data)

(P Data) Unit Control Note (b)

Unit P.C.B. B.B.R.

Placement Data (O Data)

Placement Data Un Placement Data Placement Data (P Data)

(P Data) Unit control

Unit P.C.B. B.B.R.

Placement Data (O Data)

(a) Specify these parameters (data) for automatic adjustment

of the conveyor and chute widths, etc.

(b) Specify these parameters (data) according to the situational

changes.

Placement Coordinate Reference Point

0110-003 2 - 7 AFO01EDTP

2. Pattern Program