3OM-1050-002.pdf - 第4页
About the Instruction Manual V olume 5: Pneumatic and Electrical Diagrams This provides various kinds of material such as pneu- matic and electrical circuit diagrams for those who are in charge of machine servicing opera…
About the Instruction Manual
• This instruction manual is classified into several volumes on subjec-
tive basis as follows.
Volume 1: Operation (Operator)
This describes the fundamentals for those who read
this instruction manual and use the component place-
ment machine for the first time.
Coverage: This covers the checking items, the safety
precautions, the scope of the machine, the
preparatory and ending procedures of au-
tomatic operation, and the troubleshooting
on simple errors.
Volume 2: Operation (Supervisor)
This describes the general items related to machine
operations for those who have learned how to operate
the machine.
Coverage: This covers the specifications and func-
tions of the machine, various menus re-
lated to the program change, automatic op-
erations, and maintenance, etc.
Volume 3: Programming and Machine Data
This describes various data for a programmer(s) who
creates pattern programs and a supervisor who must
understand the meanings of various data.
Coverage: This covers the various data such as pat-
tern program, component library data and
the menus for production control and sys-
tem settings.
Volume 4: Maintenance and Troubleshooting
This describes periodic maintenance operations,
troubleshooting, etc., for those who use this machine.
Coverage: This covers periodic maintenance opera-
tions, the list of consumables and servic-
ing parts, troubleshooting on simple errors,
and the and remedial measures after "ER-
ROR" window.
INSTRUCTION MANUAL
CHIP MOUNTER
TCM-X100, X200, X300
Volume 1 : Operation (Operator)
INSTRUCTION MANUAL
Volume 2 : Operation (Supervisor)
CHIP MOUNTER
TCM-X100, X200, X300
0307-005 2 AFO01EDTP
Fig. 3X2
Fig. 3X3
INSTRUCTION MANUAL
Volume 3 : Programming and
Machine Data
CHIP MOUNTER
TCM-X100, X200, X300
Fig. 3X4
INSTRUCTION MANUAL
Volume 4 : Maintenance and
ޓTroubleshooting
CHIP MOUNTER
TCM-X100, X200, X300
Fig. 3X5
About the Instruction Manual
Volume 5: Pneumatic and Electrical Diagrams
This provides various kinds of material such as pneu-
matic and electrical circuit diagrams for those who are
in charge of machine servicing operations.
Coverage: Pneumatic Diagram, Parts Location, Elec-
trical Circuit Diagrams, etc.
COMPONENT LIBRARY:
This describes an explanation of component library data
and how to create it.
• This manual may not be copied, in whole or part,
without written consent of the publisher.
• This manual should be regarded as part of the ma-
chine and the contents comply with all the specifica-
tions regarding the purchased machine. Please keep
this manual within reach to serve as a handy tool in
completely understanding the workings of this ma-
chine.
• The contents of this manual are subject to change
without prior notice.
0307-005 3
AFO01EDTP
INSTRUCTION MANUAL
Volume 5 : Pneumatic and
Electrical Diagrams
CHIP MOUNTER
TCM-X100, X200 or X300
INSTRUCTION MANUAL
TCM-X Series
CHIP MOUNTER
COMPONENT LIBRARY
Fig. 3X6
Fig. 3X7
Contents
Page
Before Use.................................................................................................... 1
About the Instruction Manual .................................................................. 2
Contents ........................................................................................................ 4
Checking Items ............................................................................................ 9
Safety Precautions ..................................................................................... 11
Section 1 Scope
............................................................................... 1- A
1. Outline of Data .................................................................................... 1- 1
Section 2 Pattern Program
...................................................... 2- A
1. Outline of Pattern Program ............................................................. 2- 1
1.1 Composition of Pattern Program ............................................... 2- 1
1.1.1 Outline of Various Data ........................................................... 2- 2
1.1.2 Input Procedure of Each Data ............................................... 2- 2
1.2 Composition of Operation Data ................................................. 2- 3
1.3 Composition of Placement Feeder Location Data ................ 2- 5
1.4 Composition of Placement Data ................................................. 2- 6
2. Pattern Program ................................................................................. 2- 7
2.1 Types of P.C.B.’s and Required Data ........................................ 2- 7
2.2 Pattern Program Name ................................................................. 2-13
2.3 Operation Data ................................................................................ 2-13
2.4 Placement Feeder Location Data .............................................. 2-42
2.5 Placement Data ............................................................................... 2-45
3. Example of Pattern Program Creation ......................................... 2-58
3.1 Single Pattern ................................................................................. 2-58
3.2 Single Pattern (P.E.C. Recognition Function Enabled) ....... 2-61
3.3 Repetitive Patterns ....................................................................... 2-64
3.4 Repetitive Patterns (Unit P.C.B. B.B.R. Enabled) ................. 2-66
3.5 Repetitive Patterns
(Unit P.C.B. B.B.R. Function Enabled) ................................. 2-69
3.6 Repetitive Patterns (Block Sorting Enabled) ........................ 2-72
3.7 Repetitive Patterns
(Polar Coordinate Conversion Function) ........................... 2-75
3.8 Multi-Model Repetitive Patterns ............................................... 2-76
0307-004 4 AFO01EDTP