3OM-1050-002.pdf - 第258页
*2 Nozzle #1 X [mm], Nozzle #1 Y [mm], Nozzle #2 X [mm], Nozzle #2 Y [mm], Nozzle #3 X [mm], Nozzle #3 Y [mm], Nozzle #4 X [mm], Nozzle #4 Y [mm], Nozzle #5 X [mm], Nozzle #5 Y [mm] Each text box shows an offset value of…
(1) "Nozzle Offset High Mag." Tab
• Sheet Layout
When the "Nozzle Offset High Mag." tab is pressed in the "Nozzle" tab
sheet, the following tab sheet appears.
Fig. 3E29 "Nozzle Offset High Mag." Tab Sheet
• Sheet Composition
*1 Head
The head Nos. are displayed.
0301-005 5-29
AFO01EDTP
*1
*2
3.2 "Device Offset" Tab
*2 Nozzle #1 X [mm], Nozzle #1 Y [mm], Nozzle #2 X [mm], Nozzle
#2 Y [mm], Nozzle #3 X [mm], Nozzle #3 Y [mm], Nozzle #4 X
[mm], Nozzle #4 Y [mm], Nozzle #5 X [mm], Nozzle #5 Y [mm]
Each text box shows an offset value of nozzle position based on the
center of the component recognition camera (Camera #1 High Mag-
nification) at component recognition of each nozzle.
(a) These offset values are automatically calculated through
teaching operation.
(b) When a nozzle is located at the place shown below,
plus values are allocated for both X and Y.
Fig. 3E30
0207-004 5-30
AFO01EDTP
3.2 "Device Offset" Tab
(2) "Nozzle Offset Low Mag." Tab
• Sheet Layout
When the "Nozzle Offset Low Mag." tab is pressed in the "Nozzle" tab
sheet, the following tab sheet appears.
Fig. 3E31 "Nozzle Offset Low Mag." Tab Sheet
• Sheet Composition
*1 Head
The head Nos. are displayed.
0301-005 5-31
AFO01EDTP
*1
*2
3.2 "Device Offset" Tab