N7201A652E.pdf - 第101页
NPM- TT2 EJM1EE-MB -02O-04 2-2-2 -10 Checks transcript ion conditions. (Displayed when the transcription unit is mounted) (option) Library Displays the library data of installable feeders. Displays the library data of av…
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-9
Checks and modifies PCB warpage
data.
PCB
Feeder
Production
data menu
Data
modification
Placement
Pattern
Nozzle stock
Soft switch
Tray
Enters and modifies the tray-related
data including tray sizes and pitches.
Configures pallet and feeder settings.
Enters and modifies component
shape data.
Enters and modifies placement
condition data.
Configures pallet and feeder settings.
Enters and modifies component
shape data.
Enters and modifies placement
condition data.
Checks and modifies PCB data.
Checks and modifies PCB recognition
data.
Checks and modifies pattern attribute
data.
Checks and modifies production data.
Checks and modifies group attribute
data.
Displays information on the nozzles retained by the nozzle
changer.
Checks the setting status of the soft
switch used to set up operating
conditions.
Checks the setting status of the
machine’s communication switch.
Engineer mode 3
Compo-
nent
names
Menu configuration 5
Operating procedure
2-2-2
Checks and modifies the support pin
(for automatic change) data.
First layer Second layer Third layer Fourth layer
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-10
Checks transcription conditions.
(Displayed when the transcription unit is mounted)
(option)
Library
Displays the library data of installable feeders.
Displays the library data of available nozzles.
Nozzle
Feeder
Data check
Checks production data
Teach
Checks the PCB recognition process
and fixes PCB recognition
coordinates.
Checks the component recognition
process and modifies component data.
PCB
Moves to a component pickup
position and sets the pickup offset.
Moves to a component pickup position
and sets the tray pickup position.
Feeder
Checks PCB placement state and then
the conditions to correct PCB
displacement.
Placement
Pattern
attribute
Checks the bad mark recognition
process and modifies the bad mark
coordinates.
Selects a target for conditional
placement on a placement point basis.
Checks the machine judgment mark
recognition process.
Tray
Checks the component recognition
process and modifies component data.
Checks the PCB warpage process and
modifies the measurement point data.
Preparation
First layer Second layer Third layer Fourth layer
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-11
Engineer mode 4
Compo-
nent
names
Menu configuration 6
Operating procedure
2-2-2
Input addresses are displayed in the
unit of bits.
Output addresses are displayed in the
unit of bits.
Whole
Returns all axes to the origin.
Checks the current positions and
status of all the axes controlled by the
machine.
Replaces the nozzle.
Head
Checks the machine for normality
with the aid of head motions.
Checks the valve status and actuate
each valve on a stand-alone basis.
Conveyor
Adjusts the conveyor width to the
desired one.
Transfers PCBs.
Feeder
Displays information on the feeders
installed to the machine.
Adjustment
Machine
menu
Tray
Checks the motions of the tray unit .
Checks the motions of the feeders
installed to the machine.
Changes the lane to adjust.
（Displays only for dual lane)
First layer Second layer Third layer Fourth layer