N7201A652E.pdf - 第52页

NPM- TT2 EJM1EE-SF-01N-05 Pr ecautions 3 Handling of the height sensor Item Laser specifications Manufacture r Panasonic Smart Factory Solutions Co., Ltd. Model numb er N610166559AA Wavelength 655 nm Output 220 μW Class …

NPM-TT2 EJM1EE-SF-01N-05

1-4-4

●In order to prevent the components being picked up from falling, the vacuum pump motor is designed

not to stop even if the emergency stop switch is pressed.

Handling of motors

Handling of connectors

Front side

●When the emergency stop switch is pushed, the following motors are stop.

・X-axis and Y-axis motors

・Head Z-axis and θ-axis motors

・Conveyor motor

・Width adjustment motor

●The following connectors do not cut off the power. Be sure to turn OFF the machine power when you

connect or disconnect connectors.

・Power connector for the CPU BOX

・Power connector for trays

Confirmation

Vacuum pump

NPM-TT2 EJM1EE-SF-01N-05

Precautions 3

Handling of the height sensor

Item Laser specifications

Manufacturer

Panasonic Smart Factory Solutions

Co., Ltd.

Model number

N610166559AA

Wavelength

655 nm

Output

220 μW

Class

Class 1

Installation

position

See below

Regulation IEC60825-1 2007

1-4-5

1-4

Front side

●The height sensor complies with the class 1 (IEC60825-1) level of the laser safety standard, so it is

basically safe under the normal use. Do not directly look into during maintenance or operation.

■Never look it into directly.

■Height sensor specifications

●The height sensor can be installed to the X-unit in the front and rear of the machine.

Output of laser elements is maximum of 220 μW. The sensor head does not have mechanism to stop

emission of the laser beam while disassembled. If disassembled, you may be exposed by laser radiation.

Never disassemble the sensor head.

■ Laser class label affixed on the unit

CLASS 1 LASER RPODUCT

NPM-TT2 EJM1EE-SF-01N-05

1-4-6

Rear side

■ Laser class label affixed on the unit

Confirmation