N7201A652E.pdf - 第439页
NPM- TT2 EJM1E E-MB-05O-05 5-2-9 -2 System administration
NPM-TT2 EJM1EE-MB-05O-05
Unit
adjust-
ment
Conveyor width
adjustment
5-2-9-1
●Always remove all PCB support pins before adjusting conveyor width.
Operating procedure
5-2-9
1 2
2
1
+
1
(Manual input)
(The conveyor width is adjusted)
■To input production data of LNB
or the SD card
Input adjustment width
■To input manually
Touch the numerical part on the screen
to display the input screen.
When PCBs are loaded onto or removed from the conveyor, be
sure to turn OFF the servo switch
(Risk of injury due to machine movement)
DANGER
(Production data)
A
2
1
■In single lane mode
■In dual lane mode
A
Lane
Select the desired lane and adjust the
width. If both lanes are selected, both
lanes can be moved simultaneously.
NPM-TT2 EJM1EE-MB-05O-05
5-2-9-2
System
administration
NPM-TT2 EJM1EE-MB-05O-05
Unit
adjust-
ment
Head camera
information check 1
5-2-10-1
Operating procedure
5-2-10
You can check the recognition process of the head camera or the status of Head camera/LED light/Capture.
A
B
Checking the recognition device
A
B
Cursor movement/Frame
size adjustment
Choose a cursor moving
speed.
■To move the cursor
■To enlarge or reduce the frame size
■To initialize the cursor position
and the frame size
(Recognition device functions are
displayed)
(The error screen is displayed)
D
C
C
D
■[Function] screen
E