N7201A652E.pdf - 第327页

NPM- TT2 EJM1EE-MB-04 O-03 7 7 T o reconfirm the result of 5 6 + 5 4-2-5 -4 5 Ｓｅｔｔｉｎｇ change 6 1 Confirm the recognition result ● Ensure [ANS=100 ] appea rs in the recognition result field. ● If A N S i s 1 0 0 or l es s…

100%1 / 512
NPM-TT2 EJM1EE-MB-04O-03
Produc-
tion data
teaching
Component
displacement check 2
2
1
3
4-2-5-3
2
1
15
Choose a recognition method
Operating procedure
4-2-5
4
3-nozzle head-only function
This function, reserved for the 3-nozzle head, recognizes a component by rotating it in 1 degree increments in
the set angel range of ±5 degrees.
●Perform both and .
3
4
Perform steps from through
in (P. 4-2-4)
NPM-TT2 EJM1EE-MB-04O-03
7
7
To reconfirm the result of
5
6
+
5
4-2-5-4
5
Ｓｅｔｔｉｎｇ
change
6
1
Confirm the recognition result
●Ensure [ANS=100] appears in the
recognition result field.
●If ANS is 100 or less, repeat from
Rθ : Recognition angle
ANS : Result
ΔX : Recognition result from X
ΔY : Recognition result from Y
Δθ : Recognition result from θ
NPM-TT2 EJM1EE-MB-04O-03
●Perform on both and .
Produc-
tion data
teaching
4-2-6-1
Operating procedure
4-2-6
Part vacuum offset
teaching 1
Pick position teaching is performed. It is used for a component that the pickup position is other than the
center.
Specify the center of the component and then specify the pickup position.
C
A
B
ADR
Slot number arranging feeders
(Address number, arrangement position
(L/R))
X,Y
Moving amount of X and Y
Execute a feeding action of a feeder
G
E
F
Switch a lamp to adjust
Select a moving distance of an image
(“High” / “Low”)
Select a moving pitch of an image
(10 / 1.0 / 0.1)
D
Switch addresses
Change an amount of the lamp value
Adjust the lamp value
Scroll a component name if it is too long
to see
A B
C
D
EFG