N7201A652E.pdf - 第335页
NPM- TT2 EJM1EE-MB-04 O-03 4-2-8 -2 Ｓｅｔｔｉｎｇ change 5 5 + 6 4 + (The data is saved ) 4 Repeat steps from to 5 3 7 ■ T o manually teach Adjust the brightness s o that you can view an image of the pocket. 7 8 + 8 Aligns the…
NPM-TT2 EJM1EE-MB-04O-03
Produc-
tion data
teaching
Pickup position learning
teach 1
1
+
●Perform on both and .
3
Choose the data to teach
(The head camera moves to the
pickup position and a component
image is displayed)
2
2
4-2-8-1
●Automatic teach is available only for a
component of which tape width is 8mm or 12mm
and having pickup position automatic teach.
■To automatically teach
+
Operating procedure
4-2-8
1
The offset value performed by pickup position learning during production can be checked per feeder
address. If there is any problem on the learning value, teaching the position.
3
A
A
(Recognition teach starts and the result
is displayed in )
NPM-TT2 EJM1EE-MB-04O-03
4-2-8-2
Ｓｅｔｔｉｎｇ
change
5
5
+
6
4
+
(The data is saved)
4
Repeat steps from to
53
7
■To manually teach
Adjust the brightness so that you can
view an image of the pocket.
7
8
+
8
Aligns the pocket center (pickup
position) and cross line center.
Adjust the area to view.
Change a moving amount of
an image
B C
Pocket
Component
B C
NPM-TT2 EJM1EE-MB-04O-03
+
9
(The pickup position to be carried
out in teach is held)
10
4-2-8-3
Produc-
tion data
teaching
Pickup position
learning teach 2
Operating procedure
4-2-8
11
Confirm the message
■When you do not save the data
9
10
11