N7201A652E.pdf - 第132页

NPM- TT2 EJM1EE-MB -02O-04 Pr epar a tion of the tr ay f eeder 1 2 3 5 1 Adjusts the pallet in accordance with the tray dimen sions and s ets the tray to the pallet. Loosen screw s of the pallet Adjust and fix the movabl…

100%1 / 512
NPM-TT2 EJM1EE-MB-02O-04
2-4-1-6
Preparation
NPM-TT2 EJM1EE-MB-02O-04
Preparation of the tray
feeder 1
2
3
5
1
Adjusts the pallet in accordance with the tray dimensions and sets the tray to the pallet.
Loosen screws
of the pallet
Adjust and fix the movable guide
Release the clamp
Adjust and fix the
clamp position
Setting the tray to the pallet
●4 screws
Movable guide
Place the tray on the pallet.
●1 screw
Release position
Clamp release
lever
Clamp lever
●Keep pushing the clamp
release lever until the
clamp lever is secured at
the release position.
Adjust and fix the rail
Slide the rail to leave a space
of about 1 mm between the
tray and the clamp.
Fix the rail
●2 screws
4
●Allow the clamp to press
down the center of the tray.
●1 screw
Fix the pallet
with the clamp
6
●Release the clamp lever
after pulling it until the clamp
release lever is disengaged.
2-4-2-1
Space: about 1㎜
Rail
Clamp screw
Slide the movable guide
along the side of the tray.
Fix the movable guide.
1 2
1
2
3
Operating procedure
2-4-2
Prepara-
tions
before
produc-
tion
NPM-TT2 EJM1EE-MB-02O-04
Setting the pallet to the magazine
2
6
5
3
4
Unlock the pallet
Put the pallet in
the magazine
Lock the pallet
●If the door is locked
(→P.2-4-3)
Magazine door
Pallet
●Be careful with
pallet
orientation.
2-4-2-2
1
Preparation
7
(The setting status is
updated)
ACTIVATION
ACTIVATION