N7201A652E.pdf - 第51页

NPM- TT2 EJM1EE-SF-01N-05 1-4 -4 ● In order to prevent the compon ents being picked up from falling , the vacuum pump motor is designed not to stop even if the emerg en cy stop switch is presse d. Handling of motors Hand…

100%1 / 512
NPM-TT2 EJM1EE-SF-01N-05
Precautions 2
Handling of the scanner (option)
1-4
■Do not peer into the alignment beam from the scan window.
●The eyes may be damaged by the alignment beam (laser beam).
●When there are changes in subject, the alignment beam is emitted automatically.
And then, when there are no change in it for two seconds, the alignment beam stop emission.
The wired and wireless scanners comply with IEC60825-1 Class2/IEC60825-1 Class2 laser product.
Alignment beam
(Shape of irradiated subject)
●If you frequently mate/unmate the connector on the NPM-TT2 main body, communication trouble may
occur.
●If you connect/disconnect the connector by necessity, be sure to turn OFF the machine power.
1-4-3
■Do not emit the alignment beam toward other peoples’ eyes.
●The eyes may be damaged by the alignment beam (laser beam).
■Do not disassemble the scanner.
●The alignment beam is emitted to your eyes when it is disassembled. The eyes may be damaged.
■Keep the connector on the NPM-TT2 main unit connected as possible
except when necessary.
Wired scanner Wireless scanner
NPM-TT2 EJM1EE-SF-01N-05
1-4-4
●In order to prevent the components being picked up from falling, the vacuum pump motor is designed
not to stop even if the emergency stop switch is pressed.
Handling of motors
Handling of connectors
Front side
●When the emergency stop switch is pushed, the following motors are stop.
・X-axis and Y-axis motors
・Head Z-axis and θ-axis motors
・Conveyor motor
・Width adjustment motor
●The following connectors do not cut off the power. Be sure to turn OFF the machine power when you
connect or disconnect connectors.
・Power connector for the CPU BOX
・Power connector for trays
Confirmation
Vacuum pump
NPM-TT2 EJM1EE-SF-01N-05
Precautions 3
Handling of the height sensor
Item Laser specifications
Manufacturer
Panasonic Smart Factory Solutions
Co., Ltd.
Model number
N610166559AA
Wavelength
655 nm
Output
220 μW
Class
Class 1
Installation
position
See below
Regulation IEC60825-1 2007
1-4-5
1-4
Front side
●The height sensor complies with the class 1 (IEC60825-1) level of the laser safety standard, so it is
basically safe under the normal use. Do not directly look into during maintenance or operation.
■Never look it into directly.
■Height sensor specifications
●The height sensor can be installed to the X-unit in the front and rear of the machine.
Output of laser elements is maximum of 220 μW. The sensor head does not have mechanism to stop
emission of the laser beam while disassembled. If disassembled, you may be exposed by laser radiation.
Never disassemble the sensor head.
■ Laser class label affixed on the unit
CLASS 1 LASER RPODUCT