N7201A652E.pdf - 第413页

NPM- TT2 EJM1E E-MB-05O-05 5-1-3 -4 System administration Bottle neck 1 4 2 3 Confirm the message 3 2 4 (Returns to the previous screen) Choose the lamp settings ■ Press the next operation button ■ When you do not save t…

100%1 / 512
NPM-TT2 EJM1EE-MB-05O-05
Unit
setting
Signal tower setting 2
5-1-3-3
Operating procedure
5-1-3
Confirm the message
■When you do not save the data
Components empty
●You can configure a table lamp for each component shortage status.
3
1
1
2
4
4
2 3
(Returns to the previous screen)
Choose the lamp settings for
each status
■Press the next operation button
■To set as standard specifications
(Initialize)
NPM-TT2 EJM1EE-MB-05O-05
5-1-3-4
System
administration
Bottle neck
1
4
2 3
Confirm the message
3
2
4
(Returns to the previous screen)
Choose the lamp settings
■Press the next operation button
■When you do not save the data
●You can configure a bottleneck lamp condition of a bottleneck machine in line.
■When you set to “Blink 1” of initial status,
1
NPM-TT2 EJM1EE-MB-05O-05
Unit
setting
Network setting
5-1-4-1
Operating procedure
5-1-4
A
B
You can configure communication between the machine and LNB.
MC count
The number of machines coupled
together in line.
●For a stand-alone unit, MC count is not
displayed.
Server
LNB settings.
●IP address (WAN)
LAN network address on the WAN
side (for DGS).
●
Initializes IP address of LNB of the
partner that this machine is
communicating to.
●IP address (LAN)
IP address of LNB of the partner that
this machine is communicating to.
1
Set required items from to
A C
2
Setup
C
●DHCP
■To enter automatically
■To enter manually
Enter [IP address], [Sub-net mask] and
[Gateway].
●Machine number
Enter the number of machines after
first in line (which number).
●Machine serial
Serial number.
●Group number
Enter the number of number of the
group to which this machine belongs
●Table start number
Display and configure the table start
number for the line of this machine
Client
Machine settings.
A
B
2
C