N7201A652E.pdf - 第487页

NPM- TT2 EJM1E E-MB-06O-04 At a glance 6-1-3 -4 When the stackable stick feeder is installed (Unit: mm) Outside dimensions Front side 4 619 400 996 400 996 NOTE To remove/insert stackable stick feede rs, the following wo…

100%1 / 512
NPM-TT2 EJM1EE-MB-06O-04
When an extension conveyor is installed
(Unit: mm)
Outside dimensions
13-slot supply
unit
Single tray
feeder
13-slot supply
unit
Single tray
feeder
971686971
1 314
1 0566861 056
2 798
1 444
1 514
1 629
1 265(cover outline)
1 820(conveyor width)
900
Specifi-
cation
Outside dimensions
and working area 2
Operating procedure
6-1-3
6-1-3-3
Front side
NPM-TT2 EJM1EE-MB-06O-04
At
a glance
6-1-3-4
When the stackable stick feeder is installed
(Unit: mm)
Outside dimensions
Front side
4 619
400 996
400996
NOTE
To remove/insert stackable stick feeders, the following working areas are required:
● 400 mm behind the stick feeder, as shown above, when removing/inserting feeders
in order from the end
● Max. 1 600 mm if the one in the middle of three adjoining stick feeders is removed/inserted
(Required for moving along the entire length of the feeder)
NPM-TT2 EJM1EE-MB-06O-04
Specifi-
cation
Applicable PCB
specifications 1
6-1-4-1
Operating procedure
6-1-4
Item Specification
PCB dimensions
PC size
300mm
transfer specifications
Dual lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 300mm
Single lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 590mm
PCB dimensions
M size 260mm
transfer specifications
Dual lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 260mm
Single lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 510mm
Thickness
(mm)
0.3 to 8.0
Mass (kg)
1.5kg or under (after placement)
Allowable PCB warp
(mm)
Placement area
(mm)
Dual lane mode a:50 to 300 b:44 to 294 c:3.0 d:50 to 510
Single lane mode a:50 to 590 b:44 to 584 c:3.0 d:50 to 510
Dead space
(mm)
3
28
No component area
PCB support pin
Keep 2 mm away from the component on the reverse side.
●If you want to create your own PCB-support blocks, please consult us.
Warp lower: within 0.5
Warp upper: within :0.5
3
3
3
*1）
Y
X Fixed side
a b
c
d
c
PCB flow
No component area
*1）
8-nozzle head : Max. 12
3-nozzle head : Max. 28