N7201A652E.pdf - 第489页

NPM- TT2 EJM1E E-MB-06O-04 6-1-4 -2 Item Specification PCB cutout condition PCB cutout size sho uld meet the following two condition s. ■ Condition A PCB cutout size should meet the following condition. ■ Condition B The…

100%1 / 512
NPM-TT2 EJM1EE-MB-06O-04
Specifi-
cation
Applicable PCB
specifications 1
6-1-4-1
Operating procedure
6-1-4
Item Specification
PCB dimensions
PC size
300mm
transfer specifications
Dual lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 300mm
Single lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 590mm
PCB dimensions
M size 260mm
transfer specifications
Dual lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 260mm
Single lane mode
●Min: L 50 × W 50mm ●Max: L 510 × W 510mm
Thickness
(mm)
0.3 to 8.0
Mass (kg)
1.5kg or under (after placement)
Allowable PCB warp
(mm)
Placement area
(mm)
Dual lane mode a:50 to 300 b:44 to 294 c:3.0 d:50 to 510
Single lane mode a:50 to 590 b:44 to 584 c:3.0 d:50 to 510
Dead space
(mm)
3
28
No component area
PCB support pin
Keep 2 mm away from the component on the reverse side.
●If you want to create your own PCB-support blocks, please consult us.
Warp lower: within 0.5
Warp upper: within :0.5
3
3
3
*1）
Y
X Fixed side
a b
c
d
c
PCB flow
No component area
*1）
8-nozzle head : Max. 12
3-nozzle head : Max. 28
NPM-TT2 EJM1EE-MB-06O-04
6-1-4-2
Item Specification
PCB cutout
condition
PCB cutout size should meet the following two conditions.
■Condition A
PCB cutout size should meet the following condition.
■Condition B
There should be no cutout (including slit) in the area B shown below.
PCB
projection size
from PCB
edge
Consult us.
L
L1
50 mm ≦ L ≦ 350 mm
L/4 or less
350 mm ＜ L ≦ 510 mm
Smaller one of either L/4 or 100 mm
●Above described condition is when the PCB thickness is less than1.6 mm. If the
PCB thickness exceeds 1.6 mm, please consult us.
W
W1
50 mm ≦ L ≦ 300 mm
Smaller one of either W/3 or 30 mm
300 mm ＜ L ≦ 590 mm
Consult us separately
Transport
direction
L
L1
A
A
W1
W1
W
Any of one location
30mm
Transport
direction
10mm
B
10mm
●If there is cutout (including slit) in the above area, please consult us.
At
a glance
NPM-TT2 EJM1EE-MB-06O-04
Specifi-
cation
Applicable PCB
specifications 2
6-1-4-3
Operating procedure
6-1-4
Item Specification
PCB
recognition
mark
■Examples of mark shape
●PCB recognition implements compensation through the use of the physical relationship
between recognition marks and a circuit pattern.
●A fixed contrast is required between recognition marks and a PCB.
■Recognition mark dimensions and background
●The background of a mark requires the noninterference area - larger than certain
dimensions- outside the mark itself.
●Marks are not always black in color.
■Recognition mark position
●Two PCB recognition marks are required on opposing corners of a PCB.
Triangle on the 3rd figure on the left:
Equilateral triangle
Line width on 4th figure on the left:
0.3 mm or more
0.5 mm ≦ a ≦ 1.6 mm
0.3 mm ≦ c
c
Noninterference area