N7201A652E.pdf - 第105页
NPM- TT2 EJM1EE-MB-02 O-04 2-2-2 -14 Confirms data check results. Whole Parameter Checks the origin offset. Checks the offset of XY-reference mark . Checks the parameter for the plane correction of the place ment range. …
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-13
Engineer mode 5
Compo-
nent
names
Menu configuration 7
Operating procedure
2-2-2
Configures the defect axis settings for
XY unit and the time variation
correction settings.
XY unit
Configures optional functions.
Head
Configures the parameters to move
the nozzle head vertically.
Checks and configures the defect
head status.
Conveyor
Configures the optional functions of
conveyors.
Configures the parameters.
Configures the parameters.
Configures optional functions.
Configures the parameters.
Feeder
Configures optional functions.
Tray
Machine
menu
Setup
Configures optional functions.
Configures the parameters.
Configures the parameters.
Configures optional functions.
Head
camera
First layer Second layer Third layer Fourth layer
Multi-
recognition
camera
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-14
Confirms data check results.
Whole
Parameter
Checks the origin offset.
Checks the offset of XY-reference mark.
Checks the parameter for the plane
correction of the placement range.
Checks the offset of placement position.
XY unit
Checks the head rotation center offset.
Checks the offset at each head angle.
Checks the offset of the head origin.
Checks the nozzle changer offset.
Head
Checks the parameter for load control.
Checks the origin offset.
Conveyor
Checks PCB control position offset.
(displayed when the 3-nozzle head is installed)
Preparation
Machine
menu
Setup
Configures option functions.
Height
sensor
Configures the parameters.
First layer Second layer Third layer Fourth layer
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-15
Engineer mode 6
Compo-
nent
names
Menu configuration 8
Operating procedure
2-2-2
Parameter
Machine
menu
Checks pickup position offset.
Feeder
Checks the offsets of squeegee-axis
and transcription position.
Tray
Checks the origin offset.
Checks pickup position offset.
Checks the offset and scale of the
head camera.
Checks the lamp values to be set to
the recognition device.
Head
camera
Checks the offset and magnification
of the component recognition camera.
Checks the lamp values to be set to
the recognition device.
Checks and enters the lamp values to
be set to the recognition device.
First layer Second layer Third layer Fourth layer
Multi-
recognition
camera
Checks and enters the offset
correction coefficient of the height
sensor.
Height sensor