N7201A652E.pdf - 第378页
NPM- TT2 EJM1E E-MB-05O-05 Unit setting Option setting 1 5-1-1 -1 Operating procedure 5-1-1 1 2 B A A 1 2 For temporary suspended option setting Choose the settings of each item The previous or next table is displayed. B…
5 System Administration
NPM-TT2 EJM1EE-MB-05O-05
Unit
setting
Option setting 1
5-1-1-1
Operating procedure
5-1-1
1 2
B
A
A
1
2
For temporary suspended option
setting
Choose the settings of each item
The previous or next table is
displayed.
B
A
Option item set status
(The description of the selected item is
displayed)
■To enable the item
■To disable the item
Entire condition of system actions is configured.
You can set either ON or OFF on each item.
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-2
Setting information 1
System
administration
●Default：OFF
■Whole
No. Item name Function when [ON] is selected
1 Quality trace
Transfers the log files including pickup/mounting orders and correction values
to the LNB during automatic operation.
2
Comm. abnormality
MC stop
Stops the NPM machine if communication with the LNB is broken.
3
Operation mode
Switch SD
Displays a message requesting the key disk (SD) when an attempt is made to
switch the operation mode to Engineer. Insert the key disk to switch to the
Engineer mode.
4 Parts trace
Sends the parts trace information to the LNB once the operation is started.
The information to be sent include the part information that is written to the
tape feeders whenever production of a PC board has been finished, and the
mounted part information by mounting point.
5 Screen print SD output Pressing the print screen switch saves the screenshot onto an SD card.
6
Empty Parts Auto
Screen Transition
If a “parts empty” error has occurred, the display automatically switches to the
reminder monitor screen of the part component concerned.
7
Empty Parts Auto
Screen Transition
(with stock)
If a “parts empty” error has occurred, the display automatically switches to the
reminder monitor screen of the part component concerned.
8
Auto product change
(option)
Performs production changeover (loading production data, replacing nozzles
and support pins, and adjusting the conveyor rail width, etc.) automatically.
9
Auto product change
PCB bar code recog
(option)
Recognizes barcodes on PCBs by the head camera to perform production
changeover automatically.
10
In again when auto
product change
Permits the production data to be downloaded when switching the production
data in cases where the ‘Auto product change’ function is used and defective
PC boards are reloaded after repair.
11
NG part Eject before
mounting
Ejects parts judged to be NG such as pickup error, recognition error or raised
lead, before mounting.
12
Production information
not picking up
management
Counts up all pickups attempted including parts empty and empty pockets of
the spliced tape feeders.
13
When feeder pickup
error happened.
Pickup error count
Counts up all unsuccessful pickups including those caused by parts empty
and empty pockets of the spliced tape feeders as pickup error.
14
When parts for one
piece of PCB is being
supplied, restart
operation
When the machine has stopped due to a “parts empty” error, this option
allows production to be resumed by just replenishing at least one of the
exhausted feeders.
15
Mount speed escape
action
Allows the X/Y-axis to be retracted at the mounting speed for the part being
picked up when the machine has comes to a single stop due to a cushion end
error or mounting error.