N7201A652E.pdf - 第309页
NPM- TT2 EJM1EE-MB-04 O-03 4-2-3 -4 Ｓｅｔｔｉｎｇ change + 6 6 Select the coordinate No. to measure 7 (The head camera moves t o the coordinate s to measure so that you can visually check the condition of measurement point.) 7…
NPM-TT2 EJM1EE-MB-04O-03
4-2-3-3
Produc-
tion data
teaching
PCB warpage measurement
point teach
(option) 2
Operating procedure
4-2-3
2
+
Confirm the message
3
1
(Selectable only when the warpage
mode is pattern.)
●Set the pattern number
4
(Confirm the PCB loading message
and place the PCB.)
5
(The PCB warpage measurement
point data is displayed.)
+
■If you do not operate
Select a lane
(The screen remain as it is in )
1
(The PCB is loaded and the
recognition mark is recognized.)
(For dual lane)
Teaching procedure 1
23
5
1
■For measuring per a point and change
the measurement point: To step
3
■For measuring all points and check
the result: To step
11
NPM-TT2 EJM1EE-MB-04O-03
4-2-3-4
Ｓｅｔｔｉｎｇ
change
+
6
6
Select the coordinate No. to
measure
7
(The head camera moves to the
coordinates to measure so that you
can visually check the condition of
measurement point.)
7
●The center of the image displayed on
the screen is the measurement point.
●Visually check whether to be
appropriate or not the measurement
points on the PCB surface.
NPM-TT2 EJM1EE-MB-04O-03
4-2-3-5
+
(Measure the selected measurement
coordinates and four points around it,
and the result is displayed.)
8
9
(Move to the next measurement point)
1
2
3
4
5
1.5mm
1.5mm
Confirm the difference between the
measurement point (center) and its
surrounding is 0.03mm or less
●If the measurement result is unstable
Adjust to be applicable position with
inching, and measure surroundings again.
(Adjust as a boundary of a copper foil is
not included within □1.5mm)
+
●Confirm all points
●If you change the measurement
coordinates in the step , you are
asked whether or not to save the
changed coordinates.
Select either one.
8
10
●If you change the measurement
coordinates in the step , you are
asked whether or not to save the
changed coordinates.
Select either one.
8
Produc-
tion data
teaching
PCB warpage measurement
point teach
(option) 2
Operating procedure
4-2-3
Teaching procedure 2
8 9
10