N7201A652E.pdf - 第104页
NPM- TT2 EJM1EE-MB-02 O-04 2-2-2 -13 Engineer mode 5 Compo- nent names Menu configur a tion 7 Operating procedure 2-2-2 Configures the defect axis settings for XY unit and the time variation correction settings. XY unit …
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-12
Checks the entire recognition process.
Displays head camera status and
related information.
Displays LED light status and related
information.
Displays the capture status of the
head camera and related information.
Head camera
Configures the settings for
communication with LNB.
Whole
Configures the conditions for the
whole system operations.
Configures the indicating lamp and
buzzer settings.
Configures the indicating lamp and
buzzer settings during production or
under suspension.
Configures the monitor settings.
Setup
Preparation
First layer Second layer Third layer Fourth layer
Multi-
recognition
camera
Displays multi-recognition camera
status and related information.
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-13
Engineer mode 5
Compo-
nent
names
Menu configuration 7
Operating procedure
2-2-2
Configures the defect axis settings for
XY unit and the time variation
correction settings.
XY unit
Configures optional functions.
Head
Configures the parameters to move
the nozzle head vertically.
Checks and configures the defect
head status.
Conveyor
Configures the optional functions of
conveyors.
Configures the parameters.
Configures the parameters.
Configures optional functions.
Configures the parameters.
Feeder
Configures optional functions.
Tray
Machine
menu
Setup
Configures optional functions.
Configures the parameters.
Configures the parameters.
Configures optional functions.
Head
camera
First layer Second layer Third layer Fourth layer
Multi-
recognition
camera
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-14
Confirms data check results.
Whole
Parameter
Checks the origin offset.
Checks the offset of XY-reference mark.
Checks the parameter for the plane
correction of the placement range.
Checks the offset of placement position.
XY unit
Checks the head rotation center offset.
Checks the offset at each head angle.
Checks the offset of the head origin.
Checks the nozzle changer offset.
Head
Checks the parameter for load control.
Checks the origin offset.
Conveyor
Checks PCB control position offset.
(displayed when the 3-nozzle head is installed)
Preparation
Machine
menu
Setup
Configures option functions.
Height
sensor
Configures the parameters.
First layer Second layer Third layer Fourth layer