N7201A652E.pdf - 第189页
NPM- TT2 EJM1EE-MB -03O-02 Production 3-1-1 -4
NPM-TT2 EJM1EE-MB-03O-02
Produc-
tion
Production start 2
Operating procedure
3-1-1
When the feeder cart is detached
21
OFF
SERVO
5
SERVO
ON
6
In the independent mode, even if the feeder cart is detached, PCBs can be produced on the opposite-axis
side. Preparation for the production is described here.
3
Move the X-axis
Move the X-axis of which the feeder cart is detached until its end comes on the retract position
seal of the Y-axis
X-axis end
3-1-1-3
Retract position seal
NPM-TT2 EJM1EE-MB-03O-02
Production
3-1-1-4
NPM-TT2 EJM1EE-MB-03O-02
3-1-2-1
Stopping production
■To stop production immediately <single stop>
1
●Production stops.
●For dual lane, both lane
1 and 2 stop.
●To restart production
+
■To stop production after the PCB being produced is
completed <cycle stop>
1
●Production stops after
the PCB being produced
is completed.
●For independent mode,
select the lane.
●To restart production
+
Produc-
tion
Production stop and
end
Operating procedure
3-1-2
■To stop production after completing the PCB
production <Automatic stop>
After the planned PCBs are produced, production stops
automatically and the screen returns to the Home menu.
(→P.2-7-1)
Cancel stop
2
Before stop
Ends
production
Ending production
2
Confirm the
message,
1
2
■For manual operation
+