N7201A652E.pdf - 第249页

NPM- TT2 EJM1EE-MB -04O-03 Lamp value of lamps 1 to 4. 4-1-3 -2 B A C D Lighting Size Choose a recog nition mark color. E Choose a light adjustment method. F Changes to the previo us or next screen. Shape selection Searc…

100%1 / 512
NPM-TT2 EJM1EE-MB-04O-03
Data
editing
4-1-3-1
D
A
B
E
Choose a recognition mark.
X[mm], Y[mm]
D E
AB
If [Pattern] or [Group] is selected in the
recognition mode and there are several
types, choose the pattern number or
group number.
F
1
Edit the data of the desired
field on the screen
Choose a recognition mode.
●PCB: Recognizes the recognition mark
●Pattern: Recognizes the pattern mark
●Group: Recognizes the group mark
PCB recognition data
edit 1
Describes how to edit the PCB recognition data registered by DGS.
Enter the PCB recognition coordinates
(X,Y) of each recognition mark.
●Touching the screen opens the input
window.
F
Type
The recognition method for each
recognition mark. Pressing the [Type]
field causes the shape setting screen of
each recognition mark to appear .
C
C
Illustration of a recognition mark (A or B or
ABC).
Recognition position on a PCB
3
Operating procedure
4-1-3
If ‘Panel Fiducial before Pattern/Pattern
Group Fiducials’ of Software Switch in DGS
is set, you can select only [Pattern] or
[Group].
NPM-TT2 EJM1EE-MB-04O-03
Lamp value of lamps 1 to 4.
4-1-3-2
B
A
C
D
Lighting
Size
Choose a recognition mark color.
E
Choose a light adjustment method.
F
Changes to the previous or next screen.
Shape selection
Search area
G
H
Returns to the previous screen.
Shape selection and edit
Size of a selected recognition mark
shape.
●Touching the screen opens the input
window.
Recognition range of one recognition mark.
●Touching the screen opens the input window.
Choose a recognition mark shape.
2
●Relationship between a head camera
lighting and lighting (→ P.5-3-9)
No. Type
1 Coaxial lighting
2 High angle lighting
3 Middle angle lighting
4 Low angle lighting
Ｓｅｔｔｉｎｇ
change
E F G
DA C B
H
E F G
D
H
Press (Type) on the
screen in step
(→P.4-1-3-1)
1
E
NPM-TT2 EJM1EE-MB-04O-03
C
B
PCB recognition coordinate of a
recognition point (X,Y)
Number to arrange several types of
patterns.
A
Pattern number.
4-1-3-3
Data
editing
PCB recognition data
edit 2
Expanded data display
3
X[mm], Y[mm] (recognition
position)
PK
PTN (pattern)
D
Returns to the previous screen.
Operating procedure
4-1-3
By the step of P.4-1-3-1
1
A B C
D