N7201A652E.pdf - 第392页

NPM- TT2 EJM1E E-MB-05O-05 5-1-1 -15 Setting information 14 Unit setting Option setting 8 Operating procedure 5-1-1 No. Item name Function w hen [ON] is selec ted 1 Measure by the height sensor (front) Measures the board…

100%1 / 512
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-14
Setting information 13
No. Item name Function when [ON] is selected
1 One Side Mark Recog
When a part of recognition mark on PCB is hidden behind the conveyor rail,
this option enables recognition with visible area of the mark.
2
Detect mark
appropriate determine
Prevents false detection of marks in the following cases:
(1) Uneven luster in area other than mark
(2) Land patterns open on one side
(3) Similar shape patterns other than mark
(4) Thru-holes of similar size other than mark
3
Bad mark recognition
judge value is variable
Uses the criterion value in the bad mark information to judge the bad mark
recognition for production boards.
4
Recognition image
save(During mark
recognition)
Saves the image of mark recognition regardless of the result (OK/NG).
5
Recognition image
save(During pickup
position recognition)
Saves the image of pickup position recognition regardless of the result
(OK/NG).
No. Item name Function when [ON] is selected
1
Save recognize
screen in time
Saves all images of the parts for which “Force to save the recognition OK
image” has been set in the production data, regardless the result of
recognition.
2
Micro parts takeout
detection
Recognizes the end of nozzle by the recognition camera and makes checks
by the vacuum sensor after mounting a part. If “part takeout” has occurred,
“mount error” is displayed.
3
Drop detect before
ejecting
Checks the pickup state before putting the component into the ejection box.
If not picked up, the machine stops due to an error.
4
Drop detect before
ejecting (pickup error)
Adds the parts of pickup error to those to be subject to Drop detect before
ejecting.
5
Drop detect before
ejecting (recognition
ANS compare)
When the result of recognition before ejecting does not agree with the result
of recognition after pickup, the machine stops due to an error.
6
Drop detect before
ejecting (multiple
pickup)
When the result of recognition after pickup is multiple pickup and the result of
recognition before ejecting is other than multiple pickup, the machine stops
due to an error.
7
Parts data reflect
during parts thickness
range error
When a part thickness range error has occurred during production, a
confirmation dialog is displayed asking whether or not to add the part
thickness offset to the part thickness in the part data.
● Default ：OFF
■ Head camera
● Default ：OFF
■ Recognition camera
System
administration
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-15
Setting information 14
Unit
setting
Option setting 8
Operating procedure
5-1-1
No. Item name Function when [ON] is selected
1
Measure by the
height sensor (front)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting.
2
Measure by the
height sensor (rear)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting.
● Default ：OFF
■ Height sensor
No. Item name Function when [ON] is selected
1
Over judge input
again
When inspection by the inspection head has resulted in NG, this option
allows judgment (OK/NG) for the NG component to be input again on the
Over judge screen.
● Default ：OFF
■ Inspection head
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-16
System
administration
Setting information 15
No. Item name Function when [ON] is selected
1
Production report
clear at auto product
change
Clears the production report at production changeover.
2
Production report
clear at the other lot
name auto product
change
Clears the production report only when changing production to a different lot
name.
The report is cleared also when the MJS ID differs.
3
Display transfer
direction of status
monitor PCB
Displays the PCB flow direction on the Status monitor screen.
4
Buzzer stop button
auto change
Changes the function button to [Buzzer stop] automatically when the buzzer
sounds.
5 PCB warp correction
Estimates the board warp based on the heights measured by sensor at
several points on the board, in order to control the mounting height.
6
Pre-pickup inspection
at run resume
Executes pre-pickup check if suspended automatic operation is restarted on
the Production start screen
No. Item name Function when [ON] is selected
1
Time-lapse change
calibration
Performs calibration for time-lapse change.
No. Item name Function when [ON] is selected
1
Vacuum sensor error
detection
Detects error by the vacuum sensor during automatic operation.
2
Nozzle holder filter
detect during head
maintenance
Detects the presence of nozzle holders when the head maintenance unit is
used.
● Default ：ON
■Whole (suspension)
● Default ：ON
■ XY unit (suspension)
● Default ：ON
■ Head (suspension)