N7201A652E.pdf - 第42页
NPM- TT2 EJM1EE-SF-01N-05 4 2 1 3 Safety manage- ment Saf ety s witches / K ey mana gement / Maintenance war ning sheet 1-3-1 -1 1-3-1 Safety switches Key management Safety covers on the machine are equ ippe d with s afe…
NPM-TT2 EJM1EE-SF-01N-05
1-2-16
Front side
■Support station box (option) ■Power supply unit (option)
Front side Front side
■Multifunctional transfer unit (option)
Confirmation
●It is attached on the right side of the unit.
NPM-TT2 EJM1EE-SF-01N-05
4
2
1
3
Safety
manage-
ment
Safety switches /
Key management /
Maintenance warning sheet
1-3-1-1
1-3-1
Safety switches
Key management
Safety covers on the machine are equipped with safety switches. In the event that either front or rear of the
safety cover is opened accidentally during automatic production, the machine will come to an emergency
stop to ensure the safety of the operators.
When you encounter a section in the manuals that reads [Turning OFF the power switch], a lock is needed.
The key for the lock should be managed by a trained person, according to the customer’s management
standard.
4
3
2
1
5
Safety covers
● Before starting automatic production, ensure that all safety covers are closed.
● When material replenishment is needed, a message will be displayed on the screen instructing you which
corresponding cover can be opened to replenish the materials.
Servo Switch
● When working inside the machine like performing changeovers or maintenance tasks, be sure to turn OFF
the servo switch on the side that is being worked on to ensure operator safety.
● If the servo switch is turned OFF, all axes will be disabled.
● Before starting production, verify whether the servo switches on the front and rear control panel have
been turned ON.
Knob
Lock plate
Placard
key
30 to 50 ｍｍ
Φ5 to Φ8
key
Lock plate
Mark on the
case
■ Locking/Unlocking procedure
Rotate the knob to left to the position
where marks on the lock plate and the
case match.
Push in the lock plate.
Turn the knob to [OFF] position with
holding the lock plate.
Put the padlock through the center
hole to lock.
Place the maintenance placard
indicating maintenance work in
progress.
NPM-TT2 EJM1EE-SF-01N-05
Maintenance warning sheet
Before performing maintenance, affix the included maintenance warning sheet (see below) to prominent
positions in the vicinity of the operating panel, for safety. During maintenance by two or more persons in
particular, in addition to using these maintenance warning sheet to ensure safety, be sure to send signals to
each other.
● This maintenance warning sheet uses a magnet. Do not use
it or store it near magnetic media or any other items
susceptible to magnetic influence.
1-3-1-2
Confirmation