N7201A652E.pdf - 第147页

NPM- TT2 EJM1EE-MB -02O-04 2-5-1 -2 How to move X-axis beam manually 1 Detach the tray feeder or the feeder cart ● For a tray feede r (→[Maintenance] P.14-8) ● For a feed er cart (→[Maintenance] P.3-2) Preparatio n Push …

100%1 / 512
NPM-TT2 EJM1EE-MB-02O-04
Operating procedure
2-5-1
2-5-1-1
+
1
Individu-
al
prepara-
tion
Replacing the nozzle
changer 1
How to move X-axis beam automatically
The method to move X-axis beam either automatically or manually is explained.
(X-axis drive units of the front and rear
sides move to their center)
Detach the tray feeder or the
feeder cart
2
●For a tray feeder
(→[Maintenance] P.13-8)
●For a feeder cart
(→[Maintenance] P.3-2)
1
Open the safety cover
3
4
5
to
Servo switch OFF
NPM-TT2 EJM1EE-MB-02O-04
2-5-1-2
How to move X-axis beam manually
1
Detach the tray
feeder or the feeder
cart
●For a tray feeder
(→[Maintenance] P.14-8)
●For a feeder cart
(→[Maintenance] P.3-2)
Preparation
Push the X-axis
inward
OFF
SERVO
2
3
4
5
To
NPM-TT2 EJM1EE-MB-02O-04
2-5-1-3
5
6
■For 3-nozzle
■For 8-nozzle
Attach the new nozzle changer
●Slide it after aligning [▲] with [▼].
Lever
Remove the nozzle changer
Replacing the nozzle
changer 2
Operating procedure
2-5-1
Individu-
al
prepara-
tion
How to change the nozzle changer
When you cannot reach the nozzle changer, use a stepstool.
2
1
1 2
Fold the lever to the left Remove the nozzle changer
7
To